English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
اكسسوارات تركيب الغرف النظيفة
موصل شبكة السقف
A galvanized four-way stamped plate that locates and fastens intersecting cleanroom ceiling-grid channels at a common center.
- Four-Way Geometry
- Eight Adjustment Slots
- Folded Locating Tabs
- Galvanized Steel
مقدمة المنتج
The ceiling grid connector is a one-piece stamped steel cross plate with four perpendicular arms. Paired oblong slots on every arm provide fixing and limited alignment adjustment, while folded tabs register mating channels around the central intersection. The low-profile fitting reinforces a four-way ceiling-grid joint without adding a bulky exposed component below the finished ceiling plane.
الخصائص الرئيسية
Two slots per arm provide balanced fixing and field adjustment.
Folded locating tabs guide compatible channels into repeatable positions.
Stamped galvanized construction combines low profile with practical joint stiffness.
مخاوف المنتج للعملاء
Four intersecting ceiling channels must remain square and flush while installers position and tighten multiple fasteners.
Loose channels drift out of square during assembly.The cross geometry and locating tabs register all four directions from one center.
Fixed round holes offer little tolerance for site alignment.Paired elongated slots provide controlled adjustment before tightening.
Stacked splice pieces create an uneven joint thickness.A single stamped plate distributes the connection in one low-profile layer.
Unprotected concealed steel can corrode in humid plenums.Galvanized or stainless material is selected for the expected exposure.
تطبيقات نموذجية
Cleanroom ceiling-grid intersectionsModular ceiling framesService-plenum support gridsWalkable ceiling subframesFour-way channel junctions
المعلمات الفنية
Typical construction ranges for a four-way galvanized cleanroom ceiling-grid connector are listed below.
| المواد الأساسية | One-piece stamped galvanized carbon-steel cross connector |
|---|---|
| سمك اللوحة | 40-150 mm compatible ceiling-panel thickness |
| العرض الفعال | 30-100 mm compatible grid-channel width per arm |
| الحد الأقصى الطول | Up to 500 mm overall connector span |
| الصلب يواجه سمك | 1.50-3.00 mm stamped connector thickness |
| الكثافة الأساسية | Approximately 7850 kg/m³ for carbon steel |
| الموصلية الحرارية | Approximately 45-60 W/(m·K) for carbon steel |
| إنهاء السطح | Silver zinc-plated or hot-dip galvanized stamped steel |
| نوع المشترك | Four-way slotted overlap connection with folded channel-locating tabs |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Galvanized or stainless steelCustom arm lengthRound or elongated fixing holesChannel-specific locating-tab geometry
Planning a Ceiling Grid Connector specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
