Three-quarter view of a galvanized four-way cleanroom ceiling grid connector

クリーンルームの設置付属品

天井グリッドコネクタ

A galvanized four-way stamped plate that locates and fastens intersecting cleanroom ceiling-grid channels at a common center.

Four-Way Geometry
Eight Adjustment Slots
Folded Locating Tabs
Galvanized Steel

見積もりリクエスト製品案内

商品紹介

The ceiling grid connector is a one-piece stamped steel cross plate with four perpendicular arms. Paired oblong slots on every arm provide fixing and limited alignment adjustment, while folded tabs register mating channels around the central intersection. The low-profile fitting reinforces a four-way ceiling-grid joint without adding a bulky exposed component below the finished ceiling plane.

主要な特徴

Four equal arms establish a controlled orthogonal grid intersection.

Two slots per arm provide balanced fixing and field adjustment.

Folded locating tabs guide compatible channels into repeatable positions.

Stamped galvanized construction combines low profile with practical joint stiffness.

お客様の製品に関する懸念事項

Four intersecting ceiling channels must remain square and flush while installers position and tighten multiple fasteners.

Loose channels drift out of square during assembly.The cross geometry and locating tabs register all four directions from one center.

Fixed round holes offer little tolerance for site alignment.Paired elongated slots provide controlled adjustment before tightening.

Stacked splice pieces create an uneven joint thickness.A single stamped plate distributes the connection in one low-profile layer.

Unprotected concealed steel can corrode in humid plenums.Galvanized or stainless material is selected for the expected exposure.

典型的な用途

Cleanroom ceiling-grid intersectionsModular ceiling framesService-plenum support gridsWalkable ceiling subframesFour-way channel junctions

技術的なパラメータ

Typical construction ranges for a four-way galvanized cleanroom ceiling-grid connector are listed below.

コア材料	One-piece stamped galvanized carbon-steel cross connector
パネルの厚さ	40-150 mm compatible ceiling-panel thickness
有効幅	30-100 mm compatible grid-channel width per arm
最大長さ	Up to 500 mm overall connector span
鋼鉄の厚さを直面する	1.50-3.00 mm stamped connector thickness
コア密度	Approximately 7850 kg/m³ for carbon steel
熱伝導率	Approximately 45-60 W/(m·K) for carbon steel
表面仕上げ	Silver zinc-plated or hot-dip galvanized stamped steel
ジョイントタイプ	Four-way slotted overlap connection with folded channel-locating tabs
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Galvanized or stainless steelCustom arm lengthRound or elongated fixing holesChannel-specific locating-tab geometry

Planning a Ceiling Grid Connector specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する