İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Kurulum Aksesuarları
Ceiling Grid Bağlayıcı
A galvanized four-way stamped plate that locates and fastens intersecting cleanroom ceiling-grid channels at a common center.
- Four-Way Geometry
- Eight Adjustment Slots
- Folded Locating Tabs
- Galvanized Steel
Ürün tanıtımı
The ceiling grid connector is a one-piece stamped steel cross plate with four perpendicular arms. Paired oblong slots on every arm provide fixing and limited alignment adjustment, while folded tabs register mating channels around the central intersection. The low-profile fitting reinforces a four-way ceiling-grid joint without adding a bulky exposed component below the finished ceiling plane.
Ana Özellikler
Two slots per arm provide balanced fixing and field adjustment.
Folded locating tabs guide compatible channels into repeatable positions.
Stamped galvanized construction combines low profile with practical joint stiffness.
Müşteri Ürün Sorunları
Four intersecting ceiling channels must remain square and flush while installers position and tighten multiple fasteners.
Loose channels drift out of square during assembly.The cross geometry and locating tabs register all four directions from one center.
Fixed round holes offer little tolerance for site alignment.Paired elongated slots provide controlled adjustment before tightening.
Stacked splice pieces create an uneven joint thickness.A single stamped plate distributes the connection in one low-profile layer.
Unprotected concealed steel can corrode in humid plenums.Galvanized or stainless material is selected for the expected exposure.
Tipik uygulamalar
Cleanroom ceiling-grid intersectionsModular ceiling framesService-plenum support gridsWalkable ceiling subframesFour-way channel junctions
Teknik parametreler
Typical construction ranges for a four-way galvanized cleanroom ceiling-grid connector are listed below.
| Temel malzemeler | One-piece stamped galvanized carbon-steel cross connector |
|---|---|
| Panel kalınlığı | 40-150 mm compatible ceiling-panel thickness |
| Effective Width (Etkili Genişlik) | 30-100 mm compatible grid-channel width per arm |
| Maksimum uzunluk | Up to 500 mm overall connector span |
| Çelik yüz yüze kalınlığı | 1.50-3.00 mm stamped connector thickness |
| Core Density (Çekirdek Yoğunluğu) | Approximately 7850 kg/m³ for carbon steel |
| Termal İletkenlik | Approximately 45-60 W/(m·K) for carbon steel |
| Yüzey bitirme | Silver zinc-plated or hot-dip galvanized stamped steel |
| Ortak tip | Four-way slotted overlap connection with folded channel-locating tabs |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Galvanized or stainless steelCustom arm lengthRound or elongated fixing holesChannel-specific locating-tab geometry
Planning a Ceiling Grid Connector specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
