Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Portas de sala limpa, janelas e sistemas de bloqueio
Porta de sala limpa de alumínio
A lightweight cleanroom doorset built from aluminum skins, an aluminum honeycomb core and precision-extruded perimeter profiles for humid rooms and frequent manual operation.
- Lightweight Aluminum Leaf
- Corrosion-Resistant Construction
- Extruded Flush Perimeter
- Anodized or Powder-Coated Finish
Introdução do produto
The Aluminum Cleanroom Door minimizes operating mass by combining thin aluminum faces with an aluminum honeycomb core. Extruded edge and frame profiles hold the leaf square while providing controlled gasket compression around the opening. The all-aluminum exterior is useful in humid interiors where unprotected carbon-steel edges could develop red rust, and the lower weight reduces stress on hinges during frequent personnel movement.
Características-chave
Aluminum skins and edge profiles resist interior humidity without red rust.
Honeycomb cells stabilize the panel while keeping the door balanced.
Extruded frame grooves retain replaceable gaskets without exposed clips.
Anodized or powder-coated surfaces can match adjacent cleanroom partitions.
Preocupações do produto do cliente
Aluminum doors address operating weight and humidity, but must still provide a rigid leaf, clean joints and durable hardware fixing points.
Heavy metal doors become tiring during frequent manual passage.Aluminum skins and honeycomb reduce mass while retaining a full-size rigid leaf.
Carbon-steel cut edges corrode in persistently humid interiors.Aluminum perimeter construction removes exposed ferrous material from the room-side edge.
Light panels can loosen around locks and closers.Internal aluminum reinforcement plates provide solid fixing zones for concentrated hardware loads.
Loose stick-on seals detach during cleaning.Profiled gasket channels mechanically retain replaceable perimeter seals.
Aplicações típicas
Humid laboratory corridorsFood preparation clean areasElectronics assembly roomsPersonnel airlocksLight-duty healthcare clean spaces
Parâmetros técnicos
Typical aluminum cleanroom door construction values are provided below.
| Material principal | Bonded aluminum honeycomb |
|---|---|
| Painel de espessura | 40-50 mm door leaf |
| Largura efetiva | 800-1200 mm single-leaf clear opening |
| Comprimento máximo | 2400 mm maximum leaf height |
| Aço enfrentando espessura | 0 mm steel; 1.0-1.2 mm aluminum leaf skins |
| Densidade Core | 40-70 kg/m³ aluminum honeycomb |
| Condutividade térmica | 0.06-0.10 W/(m·K) typical honeycomb core range |
| Superfície acabado | Satin anodized aluminum or polyester powder coating |
| Tipo conjunto | Extruded aluminum rebated frame with replaceable EPDM perimeter gasket |
| Customização | Disponível com base na aplicação pretendida e ambiente operacional |
Opções disponíveis
Natural satin anodized finishPowder-coated RAL coloursFlush vision panelAutomatic drop seal
Planning a Aluminum Cleanroom Door specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
