Complete lightweight aluminum cleanroom door with extruded frame

クリーンルームのドア、窓およびインターロックシステム

アルミニウムクリーンルームのドア

A lightweight cleanroom doorset built from aluminum skins, an aluminum honeycomb core and precision-extruded perimeter profiles for humid rooms and frequent manual operation.

Lightweight Aluminum Leaf
Corrosion-Resistant Construction
Extruded Flush Perimeter
Anodized or Powder-Coated Finish

見積もりリクエスト製品案内

商品紹介

The Aluminum Cleanroom Door minimizes operating mass by combining thin aluminum faces with an aluminum honeycomb core. Extruded edge and frame profiles hold the leaf square while providing controlled gasket compression around the opening. The all-aluminum exterior is useful in humid interiors where unprotected carbon-steel edges could develop red rust, and the lower weight reduces stress on hinges during frequent personnel movement.

主要な特徴

Low leaf mass reduces opening effort and long-term hinge loading.

Aluminum skins and edge profiles resist interior humidity without red rust.

Honeycomb cells stabilize the panel while keeping the door balanced.

Extruded frame grooves retain replaceable gaskets without exposed clips.

Anodized or powder-coated surfaces can match adjacent cleanroom partitions.

お客様の製品に関する懸念事項

Aluminum doors address operating weight and humidity, but must still provide a rigid leaf, clean joints and durable hardware fixing points.

Heavy metal doors become tiring during frequent manual passage.Aluminum skins and honeycomb reduce mass while retaining a full-size rigid leaf.

Carbon-steel cut edges corrode in persistently humid interiors.Aluminum perimeter construction removes exposed ferrous material from the room-side edge.

Light panels can loosen around locks and closers.Internal aluminum reinforcement plates provide solid fixing zones for concentrated hardware loads.

Loose stick-on seals detach during cleaning.Profiled gasket channels mechanically retain replaceable perimeter seals.

典型的な用途

Humid laboratory corridorsFood preparation clean areasElectronics assembly roomsパーソナルエアロックLight-duty healthcare clean spaces

技術的なパラメータ

Typical aluminum cleanroom door construction values are provided below.

コア材料	Bonded aluminum honeycomb
パネルの厚さ	40-50 mm door leaf
有効幅	800-1200 mm single-leaf clear opening
最大長さ	2400 mm maximum leaf height
鋼鉄の厚さを直面する	0 mm steel; 1.0-1.2 mm aluminum leaf skins
コア密度	40-70 kg/m³ aluminum honeycomb
熱伝導率	0.06-0.10 W/(m·K) typical honeycomb core range
表面仕上げ	Satin anodized aluminum or polyester powder coating
ジョイントタイプ	Extruded aluminum rebated frame with replaceable EPDM perimeter gasket
カスタマイズ	目的のアプリケーションおよび動作環境に基づいて利用可能

利用可能なオプション

Natural satin anodized finishPowder-coated RAL coloursFlush vision panelAutomatic drop seal

Planning a Aluminum Cleanroom Door specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する