Complete lightweight aluminum cleanroom door with extruded frame

Pintu Bilik Bersih, Windows dan Sistem Interlock

Pintu bilik bersih aluminium

A lightweight cleanroom doorset built from aluminum skins, an aluminum honeycomb core and precision-extruded perimeter profiles for humid rooms and frequent manual operation.

Lightweight Aluminum Leaf
Corrosion-Resistant Construction
Extruded Flush Perimeter
Anodized or Powder-Coated Finish

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The Aluminum Cleanroom Door minimizes operating mass by combining thin aluminum faces with an aluminum honeycomb core. Extruded edge and frame profiles hold the leaf square while providing controlled gasket compression around the opening. The all-aluminum exterior is useful in humid interiors where unprotected carbon-steel edges could develop red rust, and the lower weight reduces stress on hinges during frequent personnel movement.

Ciri-ciri Utama

Low leaf mass reduces opening effort and long-term hinge loading.

Aluminum skins and edge profiles resist interior humidity without red rust.

Honeycomb cells stabilize the panel while keeping the door balanced.

Extruded frame grooves retain replaceable gaskets without exposed clips.

Anodized or powder-coated surfaces can match adjacent cleanroom partitions.

Kebimbangan Produk Pelanggan

Aluminum doors address operating weight and humidity, but must still provide a rigid leaf, clean joints and durable hardware fixing points.

Heavy metal doors become tiring during frequent manual passage.Aluminum skins and honeycomb reduce mass while retaining a full-size rigid leaf.

Carbon-steel cut edges corrode in persistently humid interiors.Aluminum perimeter construction removes exposed ferrous material from the room-side edge.

Light panels can loosen around locks and closers.Internal aluminum reinforcement plates provide solid fixing zones for concentrated hardware loads.

Loose stick-on seals detach during cleaning.Profiled gasket channels mechanically retain replaceable perimeter seals.

Permohonan yang biasa

Humid laboratory corridorsFood preparation clean areasElectronics assembly roomsPersonnel airlocksLight-duty healthcare clean spaces

Parameter teknikal

Typical aluminum cleanroom door construction values are provided below.

Bahan Teras	Bonded aluminum honeycomb
Ketebalan Panel	40-50 mm door leaf
Lebar berkesan	800-1200 mm single-leaf clear opening
Panjang maksimum	2400 mm maximum leaf height
Keluli Menghadapi Ketebalan	0 mm steel; 1.0-1.2 mm aluminum leaf skins
Ketumpatan teras	40-70 kg/m³ aluminum honeycomb
Kekonduksian Terma	0.06-0.10 W/(m·K) typical honeycomb core range
Kemasan permukaan	Satin anodized aluminum or polyester powder coating
Jenis Bersatu	Extruded aluminum rebated frame with replaceable EPDM perimeter gasket
Penyesuaian	Terdapat berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi

Pilihan yang boleh didapati

Natural satin anodized finishPowder-coated RAL coloursFlush vision panelAutomatic drop seal

Planning a Aluminum Cleanroom Door specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami