English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أبواب الغرف النظيفة ونوافذ وأنظمة التشابك
الألومنيوم غرف الأبحاث الباب
A lightweight cleanroom doorset built from aluminum skins, an aluminum honeycomb core and precision-extruded perimeter profiles for humid rooms and frequent manual operation.
- Lightweight Aluminum Leaf
- Corrosion-Resistant Construction
- Extruded Flush Perimeter
- Anodized or Powder-Coated Finish
مقدمة المنتج
The Aluminum Cleanroom Door minimizes operating mass by combining thin aluminum faces with an aluminum honeycomb core. Extruded edge and frame profiles hold the leaf square while providing controlled gasket compression around the opening. The all-aluminum exterior is useful in humid interiors where unprotected carbon-steel edges could develop red rust, and the lower weight reduces stress on hinges during frequent personnel movement.
الخصائص الرئيسية
Aluminum skins and edge profiles resist interior humidity without red rust.
Honeycomb cells stabilize the panel while keeping the door balanced.
Extruded frame grooves retain replaceable gaskets without exposed clips.
Anodized or powder-coated surfaces can match adjacent cleanroom partitions.
مخاوف المنتج للعملاء
Aluminum doors address operating weight and humidity, but must still provide a rigid leaf, clean joints and durable hardware fixing points.
Heavy metal doors become tiring during frequent manual passage.Aluminum skins and honeycomb reduce mass while retaining a full-size rigid leaf.
Carbon-steel cut edges corrode in persistently humid interiors.Aluminum perimeter construction removes exposed ferrous material from the room-side edge.
Light panels can loosen around locks and closers.Internal aluminum reinforcement plates provide solid fixing zones for concentrated hardware loads.
Loose stick-on seals detach during cleaning.Profiled gasket channels mechanically retain replaceable perimeter seals.
تطبيقات نموذجية
Humid laboratory corridorsFood preparation clean areasElectronics assembly roomsPersonnel airlocksLight-duty healthcare clean spaces
المعلمات الفنية
Typical aluminum cleanroom door construction values are provided below.
| المواد الأساسية | Bonded aluminum honeycomb |
|---|---|
| سمك اللوحة | 40-50 mm door leaf |
| العرض الفعال | 800-1200 mm single-leaf clear opening |
| الحد الأقصى الطول | 2400 mm maximum leaf height |
| الصلب يواجه سمك | 0 mm steel; 1.0-1.2 mm aluminum leaf skins |
| الكثافة الأساسية | 40-70 kg/m³ aluminum honeycomb |
| الموصلية الحرارية | 0.06-0.10 W/(m·K) typical honeycomb core range |
| إنهاء السطح | Satin anodized aluminum or polyester powder coating |
| نوع المشترك | Extruded aluminum rebated frame with replaceable EPDM perimeter gasket |
| التخصيص | متاح بناءً على التطبيق المقصود وبيئة التشغيل |
الخيارات المتاحة
Natural satin anodized finishPowder-coated RAL coloursFlush vision panelAutomatic drop seal
Planning a Aluminum Cleanroom Door specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
