Complete lightweight aluminum cleanroom door with extruded frame

클린룸 도어, 창문 및 인터락 시스템

알루미늄 클린룸 문

A lightweight cleanroom doorset built from aluminum skins, an aluminum honeycomb core and precision-extruded perimeter profiles for humid rooms and frequent manual operation.

Lightweight Aluminum Leaf
Corrosion-Resistant Construction
Extruded Flush Perimeter
Anodized or Powder-Coated Finish

견적 요청 제품 찾아보기

상품 소개

The Aluminum Cleanroom Door minimizes operating mass by combining thin aluminum faces with an aluminum honeycomb core. Extruded edge and frame profiles hold the leaf square while providing controlled gasket compression around the opening. The all-aluminum exterior is useful in humid interiors where unprotected carbon-steel edges could develop red rust, and the lower weight reduces stress on hinges during frequent personnel movement.

주요 기능

Low leaf mass reduces opening effort and long-term hinge loading.

Aluminum skins and edge profiles resist interior humidity without red rust.

Honeycomb cells stabilize the panel while keeping the door balanced.

Extruded frame grooves retain replaceable gaskets without exposed clips.

Anodized or powder-coated surfaces can match adjacent cleanroom partitions.

고객 제품 관심사

Aluminum doors address operating weight and humidity, but must still provide a rigid leaf, clean joints and durable hardware fixing points.

Heavy metal doors become tiring during frequent manual passage.Aluminum skins and honeycomb reduce mass while retaining a full-size rigid leaf.

Carbon-steel cut edges corrode in persistently humid interiors.Aluminum perimeter construction removes exposed ferrous material from the room-side edge.

Light panels can loosen around locks and closers.Internal aluminum reinforcement plates provide solid fixing zones for concentrated hardware loads.

Loose stick-on seals detach during cleaning.Profiled gasket channels mechanically retain replaceable perimeter seals.

일반적인 응용 프로그램

Humid laboratory corridorsFood preparation clean areasElectronics assembly rooms인원 AirlockLight-duty healthcare clean spaces

기술 매개변수

Typical aluminum cleanroom door construction values are provided below.

핵심 재료	Bonded aluminum honeycomb
패널 두께	40-50 mm door leaf
유효 폭	800-1200 mm single-leaf clear opening
최대 길이	2400 mm maximum leaf height
강철 면면 두께	0 mm steel; 1.0-1.2 mm aluminum leaf skins
코어 밀도	40-70 kg/m³ aluminum honeycomb
열전도도 (Thermal Conductivity)	0.06-0.10 W/(m·K) typical honeycomb core range
표면 마무리	Satin anodized aluminum or polyester powder coating
접합 유형	Extruded aluminum rebated frame with replaceable EPDM perimeter gasket
사용자 정의	사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능

사용 가능한 옵션

Natural satin anodized finishPowder-coated RAL coloursFlush vision panelAutomatic drop seal

Planning a Aluminum Cleanroom Door specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.