Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Puertas de sala limpia, ventanas y sistemas de bloqueo
Aluminio puerta de sala limpia
A lightweight cleanroom doorset built from aluminum skins, an aluminum honeycomb core and precision-extruded perimeter profiles for humid rooms and frequent manual operation.
- Lightweight Aluminum Leaf
- Corrosion-Resistant Construction
- Extruded Flush Perimeter
- Anodized or Powder-Coated Finish
Introducción del producto
The Aluminum Cleanroom Door minimizes operating mass by combining thin aluminum faces with an aluminum honeycomb core. Extruded edge and frame profiles hold the leaf square while providing controlled gasket compression around the opening. The all-aluminum exterior is useful in humid interiors where unprotected carbon-steel edges could develop red rust, and the lower weight reduces stress on hinges during frequent personnel movement.
Características clave
Aluminum skins and edge profiles resist interior humidity without red rust.
Honeycomb cells stabilize the panel while keeping the door balanced.
Extruded frame grooves retain replaceable gaskets without exposed clips.
Anodized or powder-coated surfaces can match adjacent cleanroom partitions.
Preocupaciones del producto del cliente
Aluminum doors address operating weight and humidity, but must still provide a rigid leaf, clean joints and durable hardware fixing points.
Heavy metal doors become tiring during frequent manual passage.Aluminum skins and honeycomb reduce mass while retaining a full-size rigid leaf.
Carbon-steel cut edges corrode in persistently humid interiors.Aluminum perimeter construction removes exposed ferrous material from the room-side edge.
Light panels can loosen around locks and closers.Internal aluminum reinforcement plates provide solid fixing zones for concentrated hardware loads.
Loose stick-on seals detach during cleaning.Profiled gasket channels mechanically retain replaceable perimeter seals.
Aplicaciones típicas
Humid laboratory corridorsFood preparation clean areasElectronics assembly roomsAirlocks para personalLight-duty healthcare clean spaces
Parámetros técnicos
Typical aluminum cleanroom door construction values are provided below.
| Materiales Core | Bonded aluminum honeycomb |
|---|---|
| Panel de espesor | 40-50 mm door leaf |
| Ancho efectivo | 800-1200 mm single-leaf clear opening |
| Longitud máxima | 2400 mm maximum leaf height |
| Acero frente a espesor | 0 mm steel; 1.0-1.2 mm aluminum leaf skins |
| Densidad Core | 40-70 kg/m³ aluminum honeycomb |
| Conductividad térmica | 0.06-0.10 W/(m·K) typical honeycomb core range |
| Superficie acabada | Satin anodized aluminum or polyester powder coating |
| Tipo conjunto | Extruded aluminum rebated frame with replaceable EPDM perimeter gasket |
| Customization | Disponible según la aplicación prevista y el entorno operativo |
Opciones disponibles
Natural satin anodized finishPowder-coated RAL coloursFlush vision panelAutomatic drop seal
Planning a Aluminum Cleanroom Door specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
