Complete lightweight aluminum cleanroom door with extruded frame

Двери в чистых помещениях, окна и системы блокировки

Алюминиевая дверь чистой комнаты

A lightweight cleanroom doorset built from aluminum skins, an aluminum honeycomb core and precision-extruded perimeter profiles for humid rooms and frequent manual operation.

Lightweight Aluminum Leaf
Corrosion-Resistant Construction
Extruded Flush Perimeter
Anodized or Powder-Coated Finish

Запрос котировки Просмотреть продукты

Введение продукции

The Aluminum Cleanroom Door minimizes operating mass by combining thin aluminum faces with an aluminum honeycomb core. Extruded edge and frame profiles hold the leaf square while providing controlled gasket compression around the opening. The all-aluminum exterior is useful in humid interiors where unprotected carbon-steel edges could develop red rust, and the lower weight reduces stress on hinges during frequent personnel movement.

Основные характеристики

Low leaf mass reduces opening effort and long-term hinge loading.

Aluminum skins and edge profiles resist interior humidity without red rust.

Honeycomb cells stabilize the panel while keeping the door balanced.

Extruded frame grooves retain replaceable gaskets without exposed clips.

Anodized or powder-coated surfaces can match adjacent cleanroom partitions.

Обеспокоенность клиентов продуктами

Aluminum doors address operating weight and humidity, but must still provide a rigid leaf, clean joints and durable hardware fixing points.

Heavy metal doors become tiring during frequent manual passage.Aluminum skins and honeycomb reduce mass while retaining a full-size rigid leaf.

Carbon-steel cut edges corrode in persistently humid interiors.Aluminum perimeter construction removes exposed ferrous material from the room-side edge.

Light panels can loosen around locks and closers.Internal aluminum reinforcement plates provide solid fixing zones for concentrated hardware loads.

Loose stick-on seals detach during cleaning.Profiled gasket channels mechanically retain replaceable perimeter seals.

Типичные приложения

Humid laboratory corridorsFood preparation clean areasElectronics assembly roomsPersonnel airlocksLight-duty healthcare clean spaces

Технические параметры

Typical aluminum cleanroom door construction values are provided below.

Основной материал	Bonded aluminum honeycomb
Толщина панели	40-50 mm door leaf
эффективная ширина	800-1200 mm single-leaf clear opening
Максимальная длина	2400 mm maximum leaf height
Толщина линий стали	0 mm steel; 1.0-1.2 mm aluminum leaf skins
Плотность ядра	40-70 kg/m³ aluminum honeycomb
Теплопроводимость	0.06-0.10 W/(m·K) typical honeycomb core range
Поверхностная отделка	Satin anodized aluminum or polyester powder coating
Объединенный тип	Extruded aluminum rebated frame with replaceable EPDM perimeter gasket
Customization	Доступно в зависимости от предполагаемого приложения и операционной среды

Доступные варианты

Natural satin anodized finishPowder-coated RAL coloursFlush vision panelAutomatic drop seal

Planning a Aluminum Cleanroom Door specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой