Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraumtüren, Fenster und Interlock-Systeme
Aluminium Cleanroom Tür
A lightweight cleanroom doorset built from aluminum skins, an aluminum honeycomb core and precision-extruded perimeter profiles for humid rooms and frequent manual operation.
- Lightweight Aluminum Leaf
- Corrosion-Resistant Construction
- Extruded Flush Perimeter
- Anodized or Powder-Coated Finish
Produkteinführung
The Aluminum Cleanroom Door minimizes operating mass by combining thin aluminum faces with an aluminum honeycomb core. Extruded edge and frame profiles hold the leaf square while providing controlled gasket compression around the opening. The all-aluminum exterior is useful in humid interiors where unprotected carbon-steel edges could develop red rust, and the lower weight reduces stress on hinges during frequent personnel movement.
Key Features
Aluminum skins and edge profiles resist interior humidity without red rust.
Honeycomb cells stabilize the panel while keeping the door balanced.
Extruded frame grooves retain replaceable gaskets without exposed clips.
Anodized or powder-coated surfaces can match adjacent cleanroom partitions.
Kunden Produktbedenken
Aluminum doors address operating weight and humidity, but must still provide a rigid leaf, clean joints and durable hardware fixing points.
Heavy metal doors become tiring during frequent manual passage.Aluminum skins and honeycomb reduce mass while retaining a full-size rigid leaf.
Carbon-steel cut edges corrode in persistently humid interiors.Aluminum perimeter construction removes exposed ferrous material from the room-side edge.
Light panels can loosen around locks and closers.Internal aluminum reinforcement plates provide solid fixing zones for concentrated hardware loads.
Loose stick-on seals detach during cleaning.Profiled gasket channels mechanically retain replaceable perimeter seals.
Typische Anwendungen
Humid laboratory corridorsFood preparation clean areasElectronics assembly roomsPersonal-AirlocksLight-duty healthcare clean spaces
Technische Parameter
Typical aluminum cleanroom door construction values are provided below.
| Core Material | Bonded aluminum honeycomb |
|---|---|
| Panel Dicke | 40-50 mm door leaf |
| Effektive Breite | 800-1200 mm single-leaf clear opening |
| Maximale Länge | 2400 mm maximale Blatthöhe |
| Stahl facing Dicke | 0 mm steel; 1.0-1.2 mm aluminum leaf skins |
| Kerndichte | 40 - 70 kg / m3 Aluminium-Honeycomb |
| Thermische Leitfähigkeit | 0,06 - 0,10 W / (m · K) typischer Honigstockkernbereich |
| Oberfläche Finish | Satin anodized aluminum or polyester powder coating |
| Gemeinsamer Typ | Extruded aluminum rebated frame with replaceable EPDM perimeter gasket |
| Customisierung | Verfügbar basierend auf der beabsichtigten Anwendung und Betriebsumgebung |
Verfügbare Optionen
Natural satin anodized finishPowder-coated RAL coloursFlush vision panelAutomatic drop seal
Planning a Aluminum Cleanroom Door specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
