EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Cleanroom Doors, Windows and Interlock Systems
Toughened Glass Cleanroom Door
A transparent cleanroom doorset using a 10 mm toughened safety-glass leaf inside a stainless wrap-around frame for maximum observation, light transfer and simple wipe-down.
- Monolithic Safety-Glass Construction
- Maximum Room Visibility
- No Hollow Leaf Cavities
- Minimal Stainless Hardware
Product Introduction
The Toughened Glass Cleanroom Door replaces a conventional opaque sandwich leaf with a single robust safety-glass panel. Purpose-designed stainless hinges, pull handles and a wrap-around frame support the glass while leaving most of the opening transparent. The flat monolithic leaf contains no panel seams or internal cavities and is therefore straightforward to inspect and wipe from both sides.
Key Features
A monolithic glass leaf has no cladding seams, exposed core or face coating.
Toughened safety glass withstands higher service impact than ordinary annealed glazing.
Purpose-built stainless hinges preserve a wide clear opening with few exposed fixings.
Tint, film or manifestation can provide privacy and collision visibility where required.
Customer Product Concerns
Glass doors must provide useful visibility while controlling impact risk, privacy, hardware clutter and safe passage through a transparent opening.
Opaque doors force operators to open the room before checking occupancy or process status.A full glass leaf preserves a broad uninterrupted sightline through the closed doorway.
Framed glazed leaves create multiple beads and cleaning ledges.A single frameless toughened panel reduces the leaf to two flat wipeable faces.
Transparent doors can be difficult to perceive in busy circulation routes.Etched or printed manifestation bands make the glass boundary visible without blocking supervision.
Bulky surface closers interrupt the clean appearance of the glass.A concealed frame-mounted closer option removes the operating mechanism from the leaf face.
Typical Applications
Research laboratoriesPharmaceutical observation routesHealthcare clean corridorsMedical research suitesBright personnel airlocks
Technical Parameters
Representative dimensions for a frameless toughened-glass cleanroom door are listed below.
| Core Material | Monolithic toughened safety glass with no separate core |
|---|---|
| Panel Thickness | 10 mm toughened glass leaf |
| Effective Width | Up to 1250 mm single-door structural opening |
| Maximum Length | 2500 mm maximum structural opening height |
| Steel Facing Thickness | 0 mm steel facing; 10 mm solid glass forms the leaf |
| Core Density | Approximately 2500 kg/m³ solid soda-lime safety glass |
| Thermal Conductivity | Approximately 1.0 W/(m·K) for monolithic glass |
| Surface Finish | Clear, tinted, etched or film-finished toughened safety glass |
| Joint Type | Frameless glass leaf on stainless hinges within a sealed wrap-around frame |
| Customization | Available based on the intended application and operating environment |
Available Options
Tinted or etched glassPrinted manifestation filmFlush maglock for interlocksElectric or hydraulic opener
Planning a Toughened Glass Cleanroom Door specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
