Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Portas de sala limpa, janelas e sistemas de bloqueio
Porta de vidro limpo
A transparent cleanroom doorset using a 10 mm toughened safety-glass leaf inside a stainless wrap-around frame for maximum observation, light transfer and simple wipe-down.
- Monolithic Safety-Glass Construction
- Maximum Room Visibility
- No Hollow Leaf Cavities
- Minimal Stainless Hardware
Introdução do produto
The Toughened Glass Cleanroom Door replaces a conventional opaque sandwich leaf with a single robust safety-glass panel. Purpose-designed stainless hinges, pull handles and a wrap-around frame support the glass while leaving most of the opening transparent. The flat monolithic leaf contains no panel seams or internal cavities and is therefore straightforward to inspect and wipe from both sides.
Características-chave
A monolithic glass leaf has no cladding seams, exposed core or face coating.
Toughened safety glass withstands higher service impact than ordinary annealed glazing.
Purpose-built stainless hinges preserve a wide clear opening with few exposed fixings.
Tint, film or manifestation can provide privacy and collision visibility where required.
Preocupações do produto do cliente
Glass doors must provide useful visibility while controlling impact risk, privacy, hardware clutter and safe passage through a transparent opening.
Opaque doors force operators to open the room before checking occupancy or process status.A full glass leaf preserves a broad uninterrupted sightline through the closed doorway.
Framed glazed leaves create multiple beads and cleaning ledges.A single frameless toughened panel reduces the leaf to two flat wipeable faces.
Transparent doors can be difficult to perceive in busy circulation routes.Etched or printed manifestation bands make the glass boundary visible without blocking supervision.
Bulky surface closers interrupt the clean appearance of the glass.A concealed frame-mounted closer option removes the operating mechanism from the leaf face.
Aplicações típicas
Research laboratoriesPharmaceutical observation routesHealthcare clean corridorsMedical research suitesBright personnel airlocks
Parâmetros técnicos
Representative dimensions for a frameless toughened-glass cleanroom door are listed below.
| Material principal | Monolithic toughened safety glass with no separate core |
|---|---|
| Painel de espessura | 10 mm toughened glass leaf |
| Largura efetiva | Up to 1250 mm single-door structural opening |
| Comprimento máximo | 2500 mm maximum structural opening height |
| Aço enfrentando espessura | 0 mm steel facing; 10 mm solid glass forms the leaf |
| Densidade Core | Approximately 2500 kg/m³ solid soda-lime safety glass |
| Condutividade térmica | Approximately 1.0 W/(m·K) for monolithic glass |
| Superfície acabado | Clear, tinted, etched or film-finished toughened safety glass |
| Tipo conjunto | Frameless glass leaf on stainless hinges within a sealed wrap-around frame |
| Customização | Disponível com base na aplicação pretendida e ambiente operacional |
Opções disponíveis
Tinted or etched glassPrinted manifestation filmFlush maglock for interlocksElectric or hydraulic opener
Planning a Toughened Glass Cleanroom Door specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
