Complete toughened glass cleanroom door in a stainless wrap-around frame

클린룸 도어, 창문 및 인터락 시스템

강화된 유리 클린룸 문

A transparent cleanroom doorset using a 10 mm toughened safety-glass leaf inside a stainless wrap-around frame for maximum observation, light transfer and simple wipe-down.

Monolithic Safety-Glass Construction
Maximum Room Visibility
No Hollow Leaf Cavities
Minimal Stainless Hardware

견적 요청 제품 찾아보기

상품 소개

The Toughened Glass Cleanroom Door replaces a conventional opaque sandwich leaf with a single robust safety-glass panel. Purpose-designed stainless hinges, pull handles and a wrap-around frame support the glass while leaving most of the opening transparent. The flat monolithic leaf contains no panel seams or internal cavities and is therefore straightforward to inspect and wipe from both sides.

주요 기능

Full-height transparency supports supervision without opening the controlled room.

A monolithic glass leaf has no cladding seams, exposed core or face coating.

Toughened safety glass withstands higher service impact than ordinary annealed glazing.

Purpose-built stainless hinges preserve a wide clear opening with few exposed fixings.

Tint, film or manifestation can provide privacy and collision visibility where required.

고객 제품 관심사

Glass doors must provide useful visibility while controlling impact risk, privacy, hardware clutter and safe passage through a transparent opening.

Opaque doors force operators to open the room before checking occupancy or process status.A full glass leaf preserves a broad uninterrupted sightline through the closed doorway.

Framed glazed leaves create multiple beads and cleaning ledges.A single frameless toughened panel reduces the leaf to two flat wipeable faces.

Transparent doors can be difficult to perceive in busy circulation routes.Etched or printed manifestation bands make the glass boundary visible without blocking supervision.

Bulky surface closers interrupt the clean appearance of the glass.A concealed frame-mounted closer option removes the operating mechanism from the leaf face.

일반적인 응용 프로그램

Research laboratoriesPharmaceutical observation routesHealthcare clean corridorsMedical research suitesBright personnel airlocks

기술 매개변수

Representative dimensions for a frameless toughened-glass cleanroom door are listed below.

핵심 재료	Monolithic toughened safety glass with no separate core
패널 두께	10 mm toughened glass leaf
유효 폭	Up to 1250 mm single-door structural opening
최대 길이	2500 mm maximum structural opening height
강철 면면 두께	0 mm steel facing; 10 mm solid glass forms the leaf
코어 밀도	Approximately 2500 kg/m³ solid soda-lime safety glass
열전도도 (Thermal Conductivity)	Approximately 1.0 W/(m·K) for monolithic glass
표면 마무리	Clear, tinted, etched or film-finished toughened safety glass
접합 유형	Frameless glass leaf on stainless hinges within a sealed wrap-around frame
사용자 정의	사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능

사용 가능한 옵션

Tinted or etched glassPrinted manifestation filmFlush maglock for interlocksElectric or hydraulic opener

Planning a Toughened Glass Cleanroom Door specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.