Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Portes de salle blanche, fenêtres et systèmes de verrouillage
Porte de salle blanche en verre trempé
A transparent cleanroom doorset using a 10 mm toughened safety-glass leaf inside a stainless wrap-around frame for maximum observation, light transfer and simple wipe-down.
- Monolithic Safety-Glass Construction
- Maximum Room Visibility
- No Hollow Leaf Cavities
- Minimal Stainless Hardware
Introduction de produit
The Toughened Glass Cleanroom Door replaces a conventional opaque sandwich leaf with a single robust safety-glass panel. Purpose-designed stainless hinges, pull handles and a wrap-around frame support the glass while leaving most of the opening transparent. The flat monolithic leaf contains no panel seams or internal cavities and is therefore straightforward to inspect and wipe from both sides.
Key Features
A monolithic glass leaf has no cladding seams, exposed core or face coating.
Toughened safety glass withstands higher service impact than ordinary annealed glazing.
Purpose-built stainless hinges preserve a wide clear opening with few exposed fixings.
Tint, film or manifestation can provide privacy and collision visibility where required.
Préoccupations du client produit
Glass doors must provide useful visibility while controlling impact risk, privacy, hardware clutter and safe passage through a transparent opening.
Opaque doors force operators to open the room before checking occupancy or process status.A full glass leaf preserves a broad uninterrupted sightline through the closed doorway.
Framed glazed leaves create multiple beads and cleaning ledges.A single frameless toughened panel reduces the leaf to two flat wipeable faces.
Transparent doors can be difficult to perceive in busy circulation routes.Etched or printed manifestation bands make the glass boundary visible without blocking supervision.
Bulky surface closers interrupt the clean appearance of the glass.A concealed frame-mounted closer option removes the operating mechanism from the leaf face.
Les applications typiques
Research laboratoriesPharmaceutical observation routesHealthcare clean corridorsMedical research suitesBright personnel airlocks
Paramètres techniques
Representative dimensions for a frameless toughened-glass cleanroom door are listed below.
| Matériaux de base | Monolithic toughened safety glass with no separate core |
|---|---|
| Panneau épaisseur | 10 mm toughened glass leaf |
| Largeur effective | Up to 1250 mm single-door structural opening |
| Longueur maximale | 2500 mm maximum structural opening height |
| Acier face épaisseur | 0 mm steel facing; 10 mm solid glass forms the leaf |
| Densité Core | Approximately 2500 kg/m³ solid soda-lime safety glass |
| Conductivité thermique | Approximately 1.0 W/(m·K) for monolithic glass |
| surface finie | Clear, tinted, etched or film-finished toughened safety glass |
| Type joint | Frameless glass leaf on stainless hinges within a sealed wrap-around frame |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation |
Options disponibles
Tinted or etched glassPrinted manifestation filmFlush maglock for interlocksElectric or hydraulic opener
Planning a Toughened Glass Cleanroom Door specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
