Pemasok One-Stop Anda untuk Peralatan Cleanroom dan Fasilitas Aseptik EsensialDukungan proyek internasional
Open mobile navigationClose mobile navigation
Beranda / Produk / Pintu Cleanroom, Jendela dan Sistem Interlock / Toughened Glass Cleanroom Door
Pintu Cleanroom, Jendela dan Sistem Interlock

Pintu Cleanroom Kaca yang Dikeraskan

A transparent cleanroom doorset using a 10 mm toughened safety-glass leaf inside a stainless wrap-around frame for maximum observation, light transfer and simple wipe-down.
  • Monolithic Safety-Glass Construction
  • Maximum Room Visibility
  • No Hollow Leaf Cavities
  • Minimal Stainless Hardware
Permintaan untuk kutipan Browse Produk

Perkenalan produk

The Toughened Glass Cleanroom Door replaces a conventional opaque sandwich leaf with a single robust safety-glass panel. Purpose-designed stainless hinges, pull handles and a wrap-around frame support the glass while leaving most of the opening transparent. The flat monolithic leaf contains no panel seams or internal cavities and is therefore straightforward to inspect and wipe from both sides.

Fitur utama:

Full-height transparency supports supervision without opening the controlled room.

A monolithic glass leaf has no cladding seams, exposed core or face coating.

Toughened safety glass withstands higher service impact than ordinary annealed glazing.

Purpose-built stainless hinges preserve a wide clear opening with few exposed fixings.

Tint, film or manifestation can provide privacy and collision visibility where required.

Kekhawatiran produk pelanggan

Glass doors must provide useful visibility while controlling impact risk, privacy, hardware clutter and safe passage through a transparent opening.

Opaque doors force operators to open the room before checking occupancy or process status.A full glass leaf preserves a broad uninterrupted sightline through the closed doorway.
Framed glazed leaves create multiple beads and cleaning ledges.A single frameless toughened panel reduces the leaf to two flat wipeable faces.
Transparent doors can be difficult to perceive in busy circulation routes.Etched or printed manifestation bands make the glass boundary visible without blocking supervision.
Bulky surface closers interrupt the clean appearance of the glass.A concealed frame-mounted closer option removes the operating mechanism from the leaf face.

Aplikasi yang Tipis

Research laboratoriesPharmaceutical observation routesHealthcare clean corridorsMedical research suitesBright personnel airlocks

Parameter teknis

Representative dimensions for a frameless toughened-glass cleanroom door are listed below.

Bahan intiMonolithic toughened safety glass with no separate core
Ketebalan Panel (Panel Thickness)10 mm toughened glass leaf
Efektif lebarUp to 1250 mm single-door structural opening
Panjang maksimum2500 mm maximum structural opening height
Baja menghadap ketebalan0 mm steel facing; 10 mm solid glass forms the leaf
Kepadatan inti (core density)Approximately 2500 kg/m³ solid soda-lime safety glass
Konduktivitas Termal (Thermal Conductivity)Approximately 1.0 W/(m·K) for monolithic glass
Permukaan selesaiClear, tinted, etched or film-finished toughened safety glass
Jenis BersamaFrameless glass leaf on stainless hinges within a sealed wrap-around frame
Customization (Kustomisasi)A Tersedia berdasarkan aplikasi dan lingkungan operasi yang dimaksudkan

Pilihan yang tersedia

Tinted or etched glassPrinted manifestation filmFlush maglock for interlocksElectric or hydraulic opener

Planning a Toughened Glass Cleanroom Door specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami
Email Kami WhatsApp WhatsApp WhatsApp WhatsApp WeChat adalah

Beranda

Produk

Berita

Tentang Kami

Hubungi Kami