Complete toughened glass cleanroom door in a stainless wrap-around frame

クリーンルームのドア、窓およびインターロックシステム

強化ガラスのクリーンルームのドア

A transparent cleanroom doorset using a 10 mm toughened safety-glass leaf inside a stainless wrap-around frame for maximum observation, light transfer and simple wipe-down.

Monolithic Safety-Glass Construction
Maximum Room Visibility
No Hollow Leaf Cavities
Minimal Stainless Hardware

見積もりリクエスト製品案内

商品紹介

The Toughened Glass Cleanroom Door replaces a conventional opaque sandwich leaf with a single robust safety-glass panel. Purpose-designed stainless hinges, pull handles and a wrap-around frame support the glass while leaving most of the opening transparent. The flat monolithic leaf contains no panel seams or internal cavities and is therefore straightforward to inspect and wipe from both sides.

主要な特徴

Full-height transparency supports supervision without opening the controlled room.

A monolithic glass leaf has no cladding seams, exposed core or face coating.

Toughened safety glass withstands higher service impact than ordinary annealed glazing.

Purpose-built stainless hinges preserve a wide clear opening with few exposed fixings.

Tint, film or manifestation can provide privacy and collision visibility where required.

お客様の製品に関する懸念事項

Glass doors must provide useful visibility while controlling impact risk, privacy, hardware clutter and safe passage through a transparent opening.

Opaque doors force operators to open the room before checking occupancy or process status.A full glass leaf preserves a broad uninterrupted sightline through the closed doorway.

Framed glazed leaves create multiple beads and cleaning ledges.A single frameless toughened panel reduces the leaf to two flat wipeable faces.

Transparent doors can be difficult to perceive in busy circulation routes.Etched or printed manifestation bands make the glass boundary visible without blocking supervision.

Bulky surface closers interrupt the clean appearance of the glass.A concealed frame-mounted closer option removes the operating mechanism from the leaf face.

典型的な用途

Research laboratoriesPharmaceutical observation routesHealthcare clean corridorsMedical research suitesBright personnel airlocks

技術的なパラメータ

Representative dimensions for a frameless toughened-glass cleanroom door are listed below.

コア材料	Monolithic toughened safety glass with no separate core
パネルの厚さ	10 mm toughened glass leaf
有効幅	Up to 1250 mm single-door structural opening
最大長さ	2500 mm maximum structural opening height
鋼鉄の厚さを直面する	0 mm steel facing; 10 mm solid glass forms the leaf
コア密度	Approximately 2500 kg/m³ solid soda-lime safety glass
熱伝導率	Approximately 1.0 W/(m·K) for monolithic glass
表面仕上げ	Clear, tinted, etched or film-finished toughened safety glass
ジョイントタイプ	Frameless glass leaf on stainless hinges within a sealed wrap-around frame
カスタマイズ	目的のアプリケーションおよび動作環境に基づいて利用可能

利用可能なオプション

Tinted or etched glassPrinted manifestation filmFlush maglock for interlocksElectric or hydraulic opener

Planning a Toughened Glass Cleanroom Door specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する