EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Industry-Specific Cleanroom Equipment
Foam Cleaning Station
A mobile stainless station that meters detergent into a dense foam stream for controlled open-plant cleaning.
- Mobile Stainless Chassis
- Adjustable Chemical Induction
- Food-Grade Hose and Lance
- Foam and Rinse Operation
Product Introduction
The foam cleaning station packages a chemical injector, pressure controls and hose management on a compact stainless trolley. It draws concentrated detergent from a protected container and mixes it with the incoming water or air stream to produce clinging foam through a dedicated lance. Large wheels, an ergonomic handle and washable open-frame construction support frequent sanitation across wet production zones.
Key Features
A long food-grade hose extends the cleaning radius without moving the trolley repeatedly.
The stainless chassis resists routine wet cleaning and exposes key parts for service.
Separate foam lance and rinse selection support staged sanitation procedures.
Customer Product Concerns
Manual detergent spreading is inconsistent and often wastes chemical during open-plant cleaning.
Thin detergent solution runs off vertical equipment too quickly.The injector and foam lance create a clinging blanket that extends surface contact.
Fixed cleaning points leave distant equipment difficult to reach.The wheeled chassis and long hose bring controlled foaming closer to each work zone.
Operators may mix chemical at inconsistent strength.A metered pickup circuit provides repeatable dilution within the selected setting.
Complex equipment traps soil during cleanup.The open stainless frame and accessible hose connections simplify external rinsing and inspection.
Typical Applications
Food and beverage processing roomsMeat and seafood productionDairy and bakery washdownHigh-care equipment sanitation
Technical Parameters
Typical configurable construction values for a mobile foam cleaning station are listed below.
| Core Material | 304 stainless-steel trolley with chemical-resistant pump, seals, hose and lance |
|---|---|
| Panel Thickness | 25-40 mm folded stainless enclosure sections |
| Effective Width | 450-650 mm mobile chassis width |
| Maximum Length | Up to 1100 mm trolley and handle envelope |
| Steel Facing Thickness | 1.2-2.0 mm stainless housing and guards |
| Core Density | 7950-8050 kg/m³ for stainless-steel construction |
| Thermal Conductivity | 14-16 W/(m·K) for austenitic stainless steel |
| Surface Finish | Brushed hygienic stainless with blue food-grade hose and black chemical-resistant grips |
| Joint Type | Sanitary threaded hose couplings with clamped pump lines and welded trolley frame |
| Customization | Available based on the intended application and operating environment. |
Available Options
Single- or dual-chemical pickupIntegrated hose reelAir-assisted or water-powered foamingAlternative lance and nozzle lengths
Planning a Foam Cleaning Station specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
