Mobile foam cleaning station complete three-quarter view with hose and lance

Peralatan Bilik Bersih Spesifik Industri

Stesen pembersihan buih

A mobile stainless station that meters detergent into a dense foam stream for controlled open-plant cleaning.

Mobile Stainless Chassis
Adjustable Chemical Induction
Food-Grade Hose and Lance
Foam and Rinse Operation

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The foam cleaning station packages a chemical injector, pressure controls and hose management on a compact stainless trolley. It draws concentrated detergent from a protected container and mixes it with the incoming water or air stream to produce clinging foam through a dedicated lance. Large wheels, an ergonomic handle and washable open-frame construction support frequent sanitation across wet production zones.

Ciri-ciri Utama

Chemical induction can be adjusted to suit approved foaming detergents.

A long food-grade hose extends the cleaning radius without moving the trolley repeatedly.

The stainless chassis resists routine wet cleaning and exposes key parts for service.

Separate foam lance and rinse selection support staged sanitation procedures.

Kebimbangan Produk Pelanggan

Manual detergent spreading is inconsistent and often wastes chemical during open-plant cleaning.

Thin detergent solution runs off vertical equipment too quickly.The injector and foam lance create a clinging blanket that extends surface contact.

Fixed cleaning points leave distant equipment difficult to reach.The wheeled chassis and long hose bring controlled foaming closer to each work zone.

Operators may mix chemical at inconsistent strength.A metered pickup circuit provides repeatable dilution within the selected setting.

Complex equipment traps soil during cleanup.The open stainless frame and accessible hose connections simplify external rinsing and inspection.

Permohonan yang biasa

Food and beverage processing roomsMeat and seafood productionDairy and bakery washdownHigh-care equipment sanitation

Parameter teknikal

Typical configurable construction values for a mobile foam cleaning station are listed below.

Bahan Teras	304 stainless-steel trolley with chemical-resistant pump, seals, hose and lance
Ketebalan Panel	25-40 mm folded stainless enclosure sections
Lebar berkesan	450-650 mm mobile chassis width
Panjang maksimum	Up to 1100 mm trolley and handle envelope
Keluli Menghadapi Ketebalan	1.2-2.0 mm stainless housing and guards
Ketumpatan teras	7950-8050 kg/m³ for stainless-steel construction
Kekonduksian Terma	14-16 W / (m · K) untuk keluli tahan karat austenit
Kemasan permukaan	Brushed hygienic stainless with blue food-grade hose and black chemical-resistant grips
Jenis Bersatu	Sanitary threaded hose couplings with clamped pump lines and welded trolley frame
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Single- or dual-chemical pickupIntegrated hose reelAir-assisted or water-powered foamingAlternative lance and nozzle lengths

Planning a Foam Cleaning Station specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami