Mobile foam cleaning station complete three-quarter view with hose and lance

산업별 클린룸 장비

Foam Cleaning 스테이션

A mobile stainless station that meters detergent into a dense foam stream for controlled open-plant cleaning.

Mobile Stainless Chassis
Adjustable Chemical Induction
Food-Grade Hose and Lance
Foam and Rinse Operation

견적 요청 제품 찾아보기

상품 소개

The foam cleaning station packages a chemical injector, pressure controls and hose management on a compact stainless trolley. It draws concentrated detergent from a protected container and mixes it with the incoming water or air stream to produce clinging foam through a dedicated lance. Large wheels, an ergonomic handle and washable open-frame construction support frequent sanitation across wet production zones.

주요 기능

Chemical induction can be adjusted to suit approved foaming detergents.

A long food-grade hose extends the cleaning radius without moving the trolley repeatedly.

The stainless chassis resists routine wet cleaning and exposes key parts for service.

Separate foam lance and rinse selection support staged sanitation procedures.

고객 제품 관심사

Manual detergent spreading is inconsistent and often wastes chemical during open-plant cleaning.

Thin detergent solution runs off vertical equipment too quickly.The injector and foam lance create a clinging blanket that extends surface contact.

Fixed cleaning points leave distant equipment difficult to reach.The wheeled chassis and long hose bring controlled foaming closer to each work zone.

Operators may mix chemical at inconsistent strength.A metered pickup circuit provides repeatable dilution within the selected setting.

Complex equipment traps soil during cleanup.The open stainless frame and accessible hose connections simplify external rinsing and inspection.

일반적인 응용 프로그램

Food and beverage processing roomsMeat and seafood productionDairy and bakery washdownHigh-care equipment sanitation

기술 매개변수

Typical configurable construction values for a mobile foam cleaning station are listed below.

핵심 재료	304 stainless-steel trolley with chemical-resistant pump, seals, hose and lance
패널 두께	25-40 mm folded stainless enclosure sections
유효 폭	450-650 mm mobile chassis width
최대 길이	Up to 1100 mm trolley and handle envelope
강철 면면 두께	1.2-2.0 mm stainless housing and guards
코어 밀도	7950-8050 kg/m³ for stainless-steel construction
열전도도 (Thermal Conductivity)	14 - 16 W / (m · K) 오스테나이트 스테인레스 스틸
표면 마무리	Brushed hygienic stainless with blue food-grade hose and black chemical-resistant grips
접합 유형	Sanitary threaded hose couplings with clamped pump lines and welded trolley frame
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Single- or dual-chemical pickupIntegrated hose reelAir-assisted or water-powered foamingAlternative lance and nozzle lengths

Planning a Foam Cleaning Station specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.