English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات الغرف النظيفة المحددة للصناعة
محطة تنظيف الرغوة
A mobile stainless station that meters detergent into a dense foam stream for controlled open-plant cleaning.
- Mobile Stainless Chassis
- Adjustable Chemical Induction
- Food-Grade Hose and Lance
- Foam and Rinse Operation
مقدمة المنتج
The foam cleaning station packages a chemical injector, pressure controls and hose management on a compact stainless trolley. It draws concentrated detergent from a protected container and mixes it with the incoming water or air stream to produce clinging foam through a dedicated lance. Large wheels, an ergonomic handle and washable open-frame construction support frequent sanitation across wet production zones.
الخصائص الرئيسية
A long food-grade hose extends the cleaning radius without moving the trolley repeatedly.
The stainless chassis resists routine wet cleaning and exposes key parts for service.
Separate foam lance and rinse selection support staged sanitation procedures.
مخاوف المنتج للعملاء
Manual detergent spreading is inconsistent and often wastes chemical during open-plant cleaning.
Thin detergent solution runs off vertical equipment too quickly.The injector and foam lance create a clinging blanket that extends surface contact.
Fixed cleaning points leave distant equipment difficult to reach.The wheeled chassis and long hose bring controlled foaming closer to each work zone.
Operators may mix chemical at inconsistent strength.A metered pickup circuit provides repeatable dilution within the selected setting.
Complex equipment traps soil during cleanup.The open stainless frame and accessible hose connections simplify external rinsing and inspection.
تطبيقات نموذجية
Food and beverage processing roomsMeat and seafood productionDairy and bakery washdownHigh-care equipment sanitation
المعلمات الفنية
Typical configurable construction values for a mobile foam cleaning station are listed below.
| المواد الأساسية | 304 stainless-steel trolley with chemical-resistant pump, seals, hose and lance |
|---|---|
| سمك اللوحة | 25-40 mm folded stainless enclosure sections |
| العرض الفعال | 450-650 mm mobile chassis width |
| الحد الأقصى الطول | Up to 1100 mm trolley and handle envelope |
| الصلب يواجه سمك | 1.2-2.0 mm stainless housing and guards |
| الكثافة الأساسية | 7950-8050 kg/m³ for stainless-steel construction |
| الموصلية الحرارية | 14-16 W / (m · K) للفولاذ المقاوم للصدأ الأوستنيتي |
| إنهاء السطح | Brushed hygienic stainless with blue food-grade hose and black chemical-resistant grips |
| نوع المشترك | Sanitary threaded hose couplings with clamped pump lines and welded trolley frame |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Single- or dual-chemical pickupIntegrated hose reelAir-assisted or water-powered foamingAlternative lance and nozzle lengths
Planning a Foam Cleaning Station specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
