Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de sala limpia específicos de la industria
Estación de limpieza Foam por
A mobile stainless station that meters detergent into a dense foam stream for controlled open-plant cleaning.
- Mobile Stainless Chassis
- Adjustable Chemical Induction
- Food-Grade Hose and Lance
- Foam and Rinse Operation
Introducción del producto
The foam cleaning station packages a chemical injector, pressure controls and hose management on a compact stainless trolley. It draws concentrated detergent from a protected container and mixes it with the incoming water or air stream to produce clinging foam through a dedicated lance. Large wheels, an ergonomic handle and washable open-frame construction support frequent sanitation across wet production zones.
Características clave
A long food-grade hose extends the cleaning radius without moving the trolley repeatedly.
The stainless chassis resists routine wet cleaning and exposes key parts for service.
Separate foam lance and rinse selection support staged sanitation procedures.
Preocupaciones del producto del cliente
Manual detergent spreading is inconsistent and often wastes chemical during open-plant cleaning.
Thin detergent solution runs off vertical equipment too quickly.The injector and foam lance create a clinging blanket that extends surface contact.
Fixed cleaning points leave distant equipment difficult to reach.The wheeled chassis and long hose bring controlled foaming closer to each work zone.
Operators may mix chemical at inconsistent strength.A metered pickup circuit provides repeatable dilution within the selected setting.
Complex equipment traps soil during cleanup.The open stainless frame and accessible hose connections simplify external rinsing and inspection.
Aplicaciones típicas
Food and beverage processing roomsMeat and seafood productionDairy and bakery washdownHigh-care equipment sanitation
Parámetros técnicos
Typical configurable construction values for a mobile foam cleaning station are listed below.
| Materiales Core | 304 stainless-steel trolley with chemical-resistant pump, seals, hose and lance |
|---|---|
| Panel de espesor | 25-40 mm folded stainless enclosure sections |
| Ancho efectivo | 450-650 mm mobile chassis width |
| Longitud máxima | Up to 1100 mm trolley and handle envelope |
| Acero frente a espesor | 1.2-2.0 mm stainless housing and guards |
| Densidad Core | 7950-8050 kg/m³ for stainless-steel construction |
| Conductividad térmica | 14-16 W/(m·K) for austenitic stainless steel |
| Superficie acabada | Brushed hygienic stainless with blue food-grade hose and black chemical-resistant grips |
| Tipo conjunto | Sanitary threaded hose couplings with clamped pump lines and welded trolley frame |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Single- or dual-chemical pickupIntegrated hose reelAir-assisted or water-powered foamingAlternative lance and nozzle lengths
Planning a Foam Cleaning Station specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
