Mobile foam cleaning station complete three-quarter view with hose and lance

Оборудование для чистых помещений

Пеноочистка станции

A mobile stainless station that meters detergent into a dense foam stream for controlled open-plant cleaning.

Mobile Stainless Chassis
Adjustable Chemical Induction
Food-Grade Hose and Lance
Foam and Rinse Operation

Введение продукции

The foam cleaning station packages a chemical injector, pressure controls and hose management on a compact stainless trolley. It draws concentrated detergent from a protected container and mixes it with the incoming water or air stream to produce clinging foam through a dedicated lance. Large wheels, an ergonomic handle and washable open-frame construction support frequent sanitation across wet production zones.

Основные характеристики

Chemical induction can be adjusted to suit approved foaming detergents.

A long food-grade hose extends the cleaning radius without moving the trolley repeatedly.

The stainless chassis resists routine wet cleaning and exposes key parts for service.

Separate foam lance and rinse selection support staged sanitation procedures.

Обеспокоенность клиентов продуктами

Manual detergent spreading is inconsistent and often wastes chemical during open-plant cleaning.

Thin detergent solution runs off vertical equipment too quickly.The injector and foam lance create a clinging blanket that extends surface contact.

Fixed cleaning points leave distant equipment difficult to reach.The wheeled chassis and long hose bring controlled foaming closer to each work zone.

Operators may mix chemical at inconsistent strength.A metered pickup circuit provides repeatable dilution within the selected setting.

Complex equipment traps soil during cleanup.The open stainless frame and accessible hose connections simplify external rinsing and inspection.

Типичные приложения

Food and beverage processing roomsMeat and seafood productionDairy and bakery washdownHigh-care equipment sanitation

Технические параметры

Typical configurable construction values for a mobile foam cleaning station are listed below.

Основной материал	304 stainless-steel trolley with chemical-resistant pump, seals, hose and lance
Толщина панели	25-40 mm folded stainless enclosure sections
эффективная ширина	450-650 mm mobile chassis width
Максимальная длина	Up to 1100 mm trolley and handle envelope
Толщина линий стали	1.2-2.0 mm stainless housing and guards
Плотность ядра	7950-8050 kg/m³ for stainless-steel construction
Теплопроводимость	14-16 W/(m·K) for austenitic stainless steel
Поверхностная отделка	Brushed hygienic stainless with blue food-grade hose and black chemical-resistant grips
Объединенный тип	Sanitary threaded hose couplings with clamped pump lines and welded trolley frame
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Single- or dual-chemical pickupIntegrated hose reelAir-assisted or water-powered foamingAlternative lance and nozzle lengths

Planning a Foam Cleaning Station specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой