İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Endüstriye Özel Temiz Oda Ekipmanları
Foam Temizlik İstasyonu
A mobile stainless station that meters detergent into a dense foam stream for controlled open-plant cleaning.
- Mobile Stainless Chassis
- Adjustable Chemical Induction
- Food-Grade Hose and Lance
- Foam and Rinse Operation
Ürün tanıtımı
The foam cleaning station packages a chemical injector, pressure controls and hose management on a compact stainless trolley. It draws concentrated detergent from a protected container and mixes it with the incoming water or air stream to produce clinging foam through a dedicated lance. Large wheels, an ergonomic handle and washable open-frame construction support frequent sanitation across wet production zones.
Ana Özellikler
A long food-grade hose extends the cleaning radius without moving the trolley repeatedly.
The stainless chassis resists routine wet cleaning and exposes key parts for service.
Separate foam lance and rinse selection support staged sanitation procedures.
Müşteri Ürün Sorunları
Manual detergent spreading is inconsistent and often wastes chemical during open-plant cleaning.
Thin detergent solution runs off vertical equipment too quickly.The injector and foam lance create a clinging blanket that extends surface contact.
Fixed cleaning points leave distant equipment difficult to reach.The wheeled chassis and long hose bring controlled foaming closer to each work zone.
Operators may mix chemical at inconsistent strength.A metered pickup circuit provides repeatable dilution within the selected setting.
Complex equipment traps soil during cleanup.The open stainless frame and accessible hose connections simplify external rinsing and inspection.
Tipik uygulamalar
Food and beverage processing roomsMeat and seafood productionDairy and bakery washdownHigh-care equipment sanitation
Teknik parametreler
Typical configurable construction values for a mobile foam cleaning station are listed below.
| Temel malzemeler | 304 stainless-steel trolley with chemical-resistant pump, seals, hose and lance |
|---|---|
| Panel kalınlığı | 25-40 mm folded stainless enclosure sections |
| Effective Width (Etkili Genişlik) | 450-650 mm mobile chassis width |
| Maksimum uzunluk | Up to 1100 mm trolley and handle envelope |
| Çelik yüz yüze kalınlığı | 1.2-2.0 mm stainless housing and guards |
| Core Density (Çekirdek Yoğunluğu) | 7950-8050 kg/m³ for stainless-steel construction |
| Termal İletkenlik | 14-16 W/(m·K) for austenitic stainless steel |
| Yüzey bitirme | Brushed hygienic stainless with blue food-grade hose and black chemical-resistant grips |
| Ortak tip | Sanitary threaded hose couplings with clamped pump lines and welded trolley frame |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Single- or dual-chemical pickupIntegrated hose reelAir-assisted or water-powered foamingAlternative lance and nozzle lengths
Planning a Foam Cleaning Station specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
