English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
إضاءة الغرف النظيفة والمعدات الكهربائية
لوحة توزيع غرفة نظيفة
A sealed low-voltage breaker panel with a cleanable exterior and segregated internal bus, protective devices and outgoing circuits.
- Sealed Stainless Enclosure
- Organized Breaker Rows
- Lockable Flush Door
- Clear Circuit Schedule
مقدمة المنتج
The distribution panel groups incoming isolation, bus bars, protective breakers and outgoing terminal blocks within a stainless or powder-coated enclosure. A flush or surface door uses a continuous gasket and concealed hinge arrangement to keep the room face simple. Inside, removable dead-front covers prevent casual contact with live parts while a durable circuit schedule identifies each cleanroom load.
الخصائص الرئيسية
The internal dead front separates operating handles from energized conductors.
Clearly numbered ways simplify fault isolation and maintenance planning.
Dedicated neutral and protective-earth bars organize return conductors.
A lockable handle limits access to authorized electrical staff.
مخاوف المنتج للعملاء
Local distribution must remain serviceable yet prevent unauthorized access, liquid entry and confusing circuit identification.
Open breaker rows are exposed during routine wall cleaning.A sealed outer door protects the complete device compartment.
Unlabeled circuits extend equipment downtime during a trip.A permanent schedule and numbered terminals map each outgoing feeder.
Neutral and earth conductors become crowded across breaker wiring.Separated full-length bars provide orderly termination space.
A projecting cabinet blocks narrow cleanroom corridors.A recessed frame option places the door close to the wall plane.
تطبيقات نموذجية
Cleanroom lighting distributionEquipment branch circuitsLaboratory utility panelsAirlock and corridor power
المعلمات الفنية
Typical configurable construction ranges for a cleanroom distribution panel are listed below.
| المواد الأساسية | SUS304/SUS316L or powder-coated steel enclosure with copper bus, breakers, dead front and terminal bars |
|---|---|
| سمك اللوحة | 180-350 mm enclosure depth |
| العرض الفعال | 400-1000 mm usable cabinet width |
| الحد الأقصى الطول | Up to 1800 mm overall panel height |
| الصلب يواجه سمك | 1.2-2.0 mm enclosure body; 1.5-2.0 mm door |
| الكثافة الأساسية | Approximately 7900-8000 kg/m³ for stainless enclosure material |
| الموصلية الحرارية | 14-16 W/(m·K) for a stainless enclosure |
| إنهاء السطح | Fine-brushed stainless or light-grey/white powder coat with engraved labels |
| نوع المشترك | Gasketed hinged door with recessed frame, internal dead front and gland-plate cable entry |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Flush or surface mountingMain breaker or isolator incomerMetering and surge protectionStainless or coated-steel enclosure
Planning a Cleanroom Distribution Panel specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
