Cleanroom distribution panel with sealed stainless door and blue handle

Temiz Oda Aydınlatma ve Elektrik Ekipmanları

Temiz Oda Dağıtım Paneli

A sealed low-voltage breaker panel with a cleanable exterior and segregated internal bus, protective devices and outgoing circuits.

Sealed Stainless Enclosure
Organized Breaker Rows
Lockable Flush Door
Clear Circuit Schedule

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The distribution panel groups incoming isolation, bus bars, protective breakers and outgoing terminal blocks within a stainless or powder-coated enclosure. A flush or surface door uses a continuous gasket and concealed hinge arrangement to keep the room face simple. Inside, removable dead-front covers prevent casual contact with live parts while a durable circuit schedule identifies each cleanroom load.

Ana Özellikler

A gasketed door shields breakers and bus components from cleaning exposure.

The internal dead front separates operating handles from energized conductors.

Clearly numbered ways simplify fault isolation and maintenance planning.

Dedicated neutral and protective-earth bars organize return conductors.

A lockable handle limits access to authorized electrical staff.

Müşteri Ürün Sorunları

Local distribution must remain serviceable yet prevent unauthorized access, liquid entry and confusing circuit identification.

Open breaker rows are exposed during routine wall cleaning.A sealed outer door protects the complete device compartment.

Unlabeled circuits extend equipment downtime during a trip.A permanent schedule and numbered terminals map each outgoing feeder.

Neutral and earth conductors become crowded across breaker wiring.Separated full-length bars provide orderly termination space.

A projecting cabinet blocks narrow cleanroom corridors.A recessed frame option places the door close to the wall plane.

Tipik uygulamalar

Cleanroom lighting distributionEquipment branch circuitsLaboratory utility panelsAirlock and corridor power

Teknik parametreler

Typical configurable construction ranges for a cleanroom distribution panel are listed below.

Temel malzemeler	SUS304/SUS316L or powder-coated steel enclosure with copper bus, breakers, dead front and terminal bars
Panel kalınlığı	180-350 mm enclosure depth
Effective Width (Etkili Genişlik)	400-1000 mm usable cabinet width
Maksimum uzunluk	Up to 1800 mm overall panel height
Çelik yüz yüze kalınlığı	1.2-2.0 mm enclosure body; 1.5-2.0 mm door
Core Density (Çekirdek Yoğunluğu)	Approximately 7900-8000 kg/m³ for stainless enclosure material
Termal İletkenlik	14-16 W/(m·K) for a stainless enclosure
Yüzey bitirme	Fine-brushed stainless or light-grey/white powder coat with engraved labels
Ortak tip	Gasketed hinged door with recessed frame, internal dead front and gland-plate cable entry
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Flush or surface mountingMain breaker or isolator incomerMetering and surge protectionStainless or coated-steel enclosure

Planning a Cleanroom Distribution Panel specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun