Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Iluminación de sala limpia y equipos eléctricos
Panel de distribución Cleanroom por
A sealed low-voltage breaker panel with a cleanable exterior and segregated internal bus, protective devices and outgoing circuits.
- Sealed Stainless Enclosure
- Organized Breaker Rows
- Lockable Flush Door
- Clear Circuit Schedule
Introducción del producto
The distribution panel groups incoming isolation, bus bars, protective breakers and outgoing terminal blocks within a stainless or powder-coated enclosure. A flush or surface door uses a continuous gasket and concealed hinge arrangement to keep the room face simple. Inside, removable dead-front covers prevent casual contact with live parts while a durable circuit schedule identifies each cleanroom load.
Características clave
The internal dead front separates operating handles from energized conductors.
Clearly numbered ways simplify fault isolation and maintenance planning.
Dedicated neutral and protective-earth bars organize return conductors.
A lockable handle limits access to authorized electrical staff.
Preocupaciones del producto del cliente
Local distribution must remain serviceable yet prevent unauthorized access, liquid entry and confusing circuit identification.
Open breaker rows are exposed during routine wall cleaning.A sealed outer door protects the complete device compartment.
Unlabeled circuits extend equipment downtime during a trip.A permanent schedule and numbered terminals map each outgoing feeder.
Neutral and earth conductors become crowded across breaker wiring.Separated full-length bars provide orderly termination space.
A projecting cabinet blocks narrow cleanroom corridors.A recessed frame option places the door close to the wall plane.
Aplicaciones típicas
Cleanroom lighting distributionEquipment branch circuitsLaboratory utility panelsAirlock and corridor power
Parámetros técnicos
Typical configurable construction ranges for a cleanroom distribution panel are listed below.
| Materiales Core | SUS304/SUS316L or powder-coated steel enclosure with copper bus, breakers, dead front and terminal bars |
|---|---|
| Panel de espesor | 180-350 mm enclosure depth |
| Ancho efectivo | 400-1000 mm usable cabinet width |
| Longitud máxima | Up to 1800 mm overall panel height |
| Acero frente a espesor | 1.2-2.0 mm enclosure body; 1.5-2.0 mm door |
| Densidad Core | Approximately 7900-8000 kg/m³ for stainless enclosure material |
| Conductividad térmica | 14-16 W/(m·K) for a stainless enclosure |
| Superficie acabada | Fine-brushed stainless or light-grey/white powder coat with engraved labels |
| Tipo conjunto | Gasketed hinged door with recessed frame, internal dead front and gland-plate cable entry |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Flush or surface mountingMain breaker or isolator incomerMetering and surge protectionStainless or coated-steel enclosure
Planning a Cleanroom Distribution Panel specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
