Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Éclairage de salle blanche et équipements électriques
Panneau de distribution Cleanroom
A sealed low-voltage breaker panel with a cleanable exterior and segregated internal bus, protective devices and outgoing circuits.
- Sealed Stainless Enclosure
- Organized Breaker Rows
- Lockable Flush Door
- Clear Circuit Schedule
Introduction de produit
The distribution panel groups incoming isolation, bus bars, protective breakers and outgoing terminal blocks within a stainless or powder-coated enclosure. A flush or surface door uses a continuous gasket and concealed hinge arrangement to keep the room face simple. Inside, removable dead-front covers prevent casual contact with live parts while a durable circuit schedule identifies each cleanroom load.
Key Features
The internal dead front separates operating handles from energized conductors.
Clearly numbered ways simplify fault isolation and maintenance planning.
Dedicated neutral and protective-earth bars organize return conductors.
A lockable handle limits access to authorized electrical staff.
Préoccupations du client produit
Local distribution must remain serviceable yet prevent unauthorized access, liquid entry and confusing circuit identification.
Open breaker rows are exposed during routine wall cleaning.A sealed outer door protects the complete device compartment.
Unlabeled circuits extend equipment downtime during a trip.A permanent schedule and numbered terminals map each outgoing feeder.
Neutral and earth conductors become crowded across breaker wiring.Separated full-length bars provide orderly termination space.
A projecting cabinet blocks narrow cleanroom corridors.A recessed frame option places the door close to the wall plane.
Les applications typiques
Cleanroom lighting distributionEquipment branch circuitsLaboratory utility panelsAirlock and corridor power
Paramètres techniques
Typical configurable construction ranges for a cleanroom distribution panel are listed below.
| Matériaux de base | SUS304/SUS316L or powder-coated steel enclosure with copper bus, breakers, dead front and terminal bars |
|---|---|
| Panneau épaisseur | 180-350 mm enclosure depth |
| Largeur effective | 400-1000 mm usable cabinet width |
| Longueur maximale | Up to 1800 mm overall panel height |
| Acier face épaisseur | 1.2-2.0 mm enclosure body; 1.5-2.0 mm door |
| Densité Core | Approximately 7900-8000 kg/m³ for stainless enclosure material |
| Conductivité thermique | 14-16 W/(m·K) for a stainless enclosure |
| surface finie | Fine-brushed stainless or light-grey/white powder coat with engraved labels |
| Type joint | Gasketed hinged door with recessed frame, internal dead front and gland-plate cable entry |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Flush or surface mountingMain breaker or isolator incomerMetering and surge protectionStainless or coated-steel enclosure
Planning a Cleanroom Distribution Panel specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
