Cleanroom distribution panel with sealed stainless door and blue handle

클린룸 조명 및 전기 장비

클린룸 분배 패널

A sealed low-voltage breaker panel with a cleanable exterior and segregated internal bus, protective devices and outgoing circuits.

Sealed Stainless Enclosure
Organized Breaker Rows
Lockable Flush Door
Clear Circuit Schedule

견적 요청 제품 찾아보기

상품 소개

The distribution panel groups incoming isolation, bus bars, protective breakers and outgoing terminal blocks within a stainless or powder-coated enclosure. A flush or surface door uses a continuous gasket and concealed hinge arrangement to keep the room face simple. Inside, removable dead-front covers prevent casual contact with live parts while a durable circuit schedule identifies each cleanroom load.

주요 기능

A gasketed door shields breakers and bus components from cleaning exposure.

The internal dead front separates operating handles from energized conductors.

Clearly numbered ways simplify fault isolation and maintenance planning.

Dedicated neutral and protective-earth bars organize return conductors.

A lockable handle limits access to authorized electrical staff.

고객 제품 관심사

Local distribution must remain serviceable yet prevent unauthorized access, liquid entry and confusing circuit identification.

Open breaker rows are exposed during routine wall cleaning.A sealed outer door protects the complete device compartment.

Unlabeled circuits extend equipment downtime during a trip.A permanent schedule and numbered terminals map each outgoing feeder.

Neutral and earth conductors become crowded across breaker wiring.Separated full-length bars provide orderly termination space.

A projecting cabinet blocks narrow cleanroom corridors.A recessed frame option places the door close to the wall plane.

일반적인 응용 프로그램

Cleanroom lighting distributionEquipment branch circuitsLaboratory utility panelsAirlock and corridor power

기술 매개변수

Typical configurable construction ranges for a cleanroom distribution panel are listed below.

핵심 재료	SUS304/SUS316L or powder-coated steel enclosure with copper bus, breakers, dead front and terminal bars
패널 두께	180-350 mm enclosure depth
유효 폭	400-1000 mm usable cabinet width
최대 길이	Up to 1800 mm overall panel height
강철 면면 두께	1.2-2.0 mm enclosure body; 1.5-2.0 mm door
코어 밀도	Approximately 7900-8000 kg/m³ for stainless enclosure material
열전도도 (Thermal Conductivity)	14-16 W/(m·K) for a stainless enclosure
표면 마무리	Fine-brushed stainless or light-grey/white powder coat with engraved labels
접합 유형	Gasketed hinged door with recessed frame, internal dead front and gland-plate cable entry
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Flush or surface mountingMain breaker or isolator incomerMetering and surge protectionStainless or coated-steel enclosure

Planning a Cleanroom Distribution Panel specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.