Cleanroom distribution panel with sealed stainless door and blue handle

クリーンルーム照明 · 電気機器

クリーンルームの分配パネル

A sealed low-voltage breaker panel with a cleanable exterior and segregated internal bus, protective devices and outgoing circuits.

Sealed Stainless Enclosure
Organized Breaker Rows
Lockable Flush Door
Clear Circuit Schedule

見積もりリクエスト製品案内

商品紹介

The distribution panel groups incoming isolation, bus bars, protective breakers and outgoing terminal blocks within a stainless or powder-coated enclosure. A flush or surface door uses a continuous gasket and concealed hinge arrangement to keep the room face simple. Inside, removable dead-front covers prevent casual contact with live parts while a durable circuit schedule identifies each cleanroom load.

主要な特徴

A gasketed door shields breakers and bus components from cleaning exposure.

The internal dead front separates operating handles from energized conductors.

Clearly numbered ways simplify fault isolation and maintenance planning.

Dedicated neutral and protective-earth bars organize return conductors.

A lockable handle limits access to authorized electrical staff.

お客様の製品に関する懸念事項

Local distribution must remain serviceable yet prevent unauthorized access, liquid entry and confusing circuit identification.

Open breaker rows are exposed during routine wall cleaning.A sealed outer door protects the complete device compartment.

Unlabeled circuits extend equipment downtime during a trip.A permanent schedule and numbered terminals map each outgoing feeder.

Neutral and earth conductors become crowded across breaker wiring.Separated full-length bars provide orderly termination space.

A projecting cabinet blocks narrow cleanroom corridors.A recessed frame option places the door close to the wall plane.

典型的な用途

Cleanroom lighting distributionEquipment branch circuitsLaboratory utility panelsAirlock and corridor power

技術的なパラメータ

Typical configurable construction ranges for a cleanroom distribution panel are listed below.

コア材料	SUS304/SUS316L or powder-coated steel enclosure with copper bus, breakers, dead front and terminal bars
パネルの厚さ	180-350 mm enclosure depth
有効幅	400-1000 mm usable cabinet width
最大長さ	Up to 1800 mm overall panel height
鋼鉄の厚さを直面する	1.2-2.0 mm enclosure body; 1.5-2.0 mm door
コア密度	Approximately 7900-8000 kg/m³ for stainless enclosure material
熱伝導率	14-16 W/(m·K) for a stainless enclosure
表面仕上げ	Fine-brushed stainless or light-grey/white powder coat with engraved labels
ジョイントタイプ	Gasketed hinged door with recessed frame, internal dead front and gland-plate cable entry
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Flush or surface mountingMain breaker or isolator incomerMetering and surge protectionStainless or coated-steel enclosure

Planning a Cleanroom Distribution Panel specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する