Cleanroom distribution panel with sealed stainless door and blue handle

Cleanroom Lighting dan Peralatan Listrik

Panel Distribusi Ruang Bersih (Cleanroom Distribution Panel)

A sealed low-voltage breaker panel with a cleanable exterior and segregated internal bus, protective devices and outgoing circuits.

Sealed Stainless Enclosure
Organized Breaker Rows
Lockable Flush Door
Clear Circuit Schedule

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The distribution panel groups incoming isolation, bus bars, protective breakers and outgoing terminal blocks within a stainless or powder-coated enclosure. A flush or surface door uses a continuous gasket and concealed hinge arrangement to keep the room face simple. Inside, removable dead-front covers prevent casual contact with live parts while a durable circuit schedule identifies each cleanroom load.

Fitur utama:

A gasketed door shields breakers and bus components from cleaning exposure.

The internal dead front separates operating handles from energized conductors.

Clearly numbered ways simplify fault isolation and maintenance planning.

Dedicated neutral and protective-earth bars organize return conductors.

A lockable handle limits access to authorized electrical staff.

Kekhawatiran produk pelanggan

Local distribution must remain serviceable yet prevent unauthorized access, liquid entry and confusing circuit identification.

Open breaker rows are exposed during routine wall cleaning.A sealed outer door protects the complete device compartment.

Unlabeled circuits extend equipment downtime during a trip.A permanent schedule and numbered terminals map each outgoing feeder.

Neutral and earth conductors become crowded across breaker wiring.Separated full-length bars provide orderly termination space.

A projecting cabinet blocks narrow cleanroom corridors.A recessed frame option places the door close to the wall plane.

Aplikasi yang Tipis

Cleanroom lighting distributionEquipment branch circuitsLaboratory utility panelsAirlock and corridor power

Parameter teknis

Typical configurable construction ranges for a cleanroom distribution panel are listed below.

Bahan inti	SUS304/SUS316L or powder-coated steel enclosure with copper bus, breakers, dead front and terminal bars
Ketebalan Panel (Panel Thickness)	180-350 mm enclosure depth
Efektif lebar	400-1000 mm usable cabinet width
Panjang maksimum	Up to 1800 mm overall panel height
Baja menghadap ketebalan	1.2-2.0 mm enclosure body; 1.5-2.0 mm door
Kepadatan inti (core density)	Approximately 7900-8000 kg/m³ for stainless enclosure material
Konduktivitas Termal (Thermal Conductivity)	14-16 W/(m·K) for a stainless enclosure
Permukaan selesai	Fine-brushed stainless or light-grey/white powder coat with engraved labels
Jenis Bersama	Gasketed hinged door with recessed frame, internal dead front and gland-plate cable entry
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Flush or surface mountingMain breaker or isolator incomerMetering and surge protectionStainless or coated-steel enclosure

Planning a Cleanroom Distribution Panel specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami