Cleanroom distribution panel with sealed stainless door and blue handle

Pencahayaan bilik bersih dan peralatan elektrik

Panel Pengedaran Bilik Bersih

A sealed low-voltage breaker panel with a cleanable exterior and segregated internal bus, protective devices and outgoing circuits.

Sealed Stainless Enclosure
Organized Breaker Rows
Lockable Flush Door
Clear Circuit Schedule

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The distribution panel groups incoming isolation, bus bars, protective breakers and outgoing terminal blocks within a stainless or powder-coated enclosure. A flush or surface door uses a continuous gasket and concealed hinge arrangement to keep the room face simple. Inside, removable dead-front covers prevent casual contact with live parts while a durable circuit schedule identifies each cleanroom load.

Ciri-ciri Utama

A gasketed door shields breakers and bus components from cleaning exposure.

The internal dead front separates operating handles from energized conductors.

Clearly numbered ways simplify fault isolation and maintenance planning.

Dedicated neutral and protective-earth bars organize return conductors.

A lockable handle limits access to authorized electrical staff.

Kebimbangan Produk Pelanggan

Local distribution must remain serviceable yet prevent unauthorized access, liquid entry and confusing circuit identification.

Open breaker rows are exposed during routine wall cleaning.A sealed outer door protects the complete device compartment.

Unlabeled circuits extend equipment downtime during a trip.A permanent schedule and numbered terminals map each outgoing feeder.

Neutral and earth conductors become crowded across breaker wiring.Separated full-length bars provide orderly termination space.

A projecting cabinet blocks narrow cleanroom corridors.A recessed frame option places the door close to the wall plane.

Permohonan yang biasa

Cleanroom lighting distributionEquipment branch circuitsLaboratory utility panelsAirlock and corridor power

Parameter teknikal

Typical configurable construction ranges for a cleanroom distribution panel are listed below.

Bahan Teras	SUS304/SUS316L or powder-coated steel enclosure with copper bus, breakers, dead front and terminal bars
Ketebalan Panel	180-350 mm enclosure depth
Lebar berkesan	400-1000 mm usable cabinet width
Panjang maksimum	Up to 1800 mm overall panel height
Keluli Menghadapi Ketebalan	1.2-2.0 mm enclosure body; 1.5-2.0 mm door
Ketumpatan teras	Approximately 7900-8000 kg/m³ for stainless enclosure material
Kekonduksian Terma	14-16 W/(m·K) for a stainless enclosure
Kemasan permukaan	Fine-brushed stainless or light-grey/white powder coat with engraved labels
Jenis Bersatu	Gasketed hinged door with recessed frame, internal dead front and gland-plate cable entry
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Flush or surface mountingMain breaker or isolator incomerMetering and surge protectionStainless or coated-steel enclosure

Planning a Cleanroom Distribution Panel specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami