Cleanroom distribution panel with sealed stainless door and blue handle

Освещение и электрическое оборудование в чистых помещениях

Распределительная панель для чистых помещений

A sealed low-voltage breaker panel with a cleanable exterior and segregated internal bus, protective devices and outgoing circuits.

Sealed Stainless Enclosure
Organized Breaker Rows
Lockable Flush Door
Clear Circuit Schedule

Запрос котировки Просмотреть продукты

Введение продукции

The distribution panel groups incoming isolation, bus bars, protective breakers and outgoing terminal blocks within a stainless or powder-coated enclosure. A flush or surface door uses a continuous gasket and concealed hinge arrangement to keep the room face simple. Inside, removable dead-front covers prevent casual contact with live parts while a durable circuit schedule identifies each cleanroom load.

Основные характеристики

A gasketed door shields breakers and bus components from cleaning exposure.

The internal dead front separates operating handles from energized conductors.

Clearly numbered ways simplify fault isolation and maintenance planning.

Dedicated neutral and protective-earth bars organize return conductors.

A lockable handle limits access to authorized electrical staff.

Обеспокоенность клиентов продуктами

Local distribution must remain serviceable yet prevent unauthorized access, liquid entry and confusing circuit identification.

Open breaker rows are exposed during routine wall cleaning.A sealed outer door protects the complete device compartment.

Unlabeled circuits extend equipment downtime during a trip.A permanent schedule and numbered terminals map each outgoing feeder.

Neutral and earth conductors become crowded across breaker wiring.Separated full-length bars provide orderly termination space.

A projecting cabinet blocks narrow cleanroom corridors.A recessed frame option places the door close to the wall plane.

Типичные приложения

Cleanroom lighting distributionEquipment branch circuitsLaboratory utility panelsAirlock and corridor power

Технические параметры

Typical configurable construction ranges for a cleanroom distribution panel are listed below.

Основной материал	SUS304/SUS316L or powder-coated steel enclosure with copper bus, breakers, dead front and terminal bars
Толщина панели	180-350 mm enclosure depth
эффективная ширина	400-1000 mm usable cabinet width
Максимальная длина	Up to 1800 mm overall panel height
Толщина линий стали	1.2-2.0 mm enclosure body; 1.5-2.0 mm door
Плотность ядра	Approximately 7900-8000 kg/m³ for stainless enclosure material
Теплопроводимость	14-16 W/(m·K) for a stainless enclosure
Поверхностная отделка	Fine-brushed stainless or light-grey/white powder coat with engraved labels
Объединенный тип	Gasketed hinged door with recessed frame, internal dead front and gland-plate cable entry
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Flush or surface mountingMain breaker or isolator incomerMetering and surge protectionStainless or coated-steel enclosure

Planning a Cleanroom Distribution Panel specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой