İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Personel ve Malzeme Dekontaminasyon Ekipmanları
Statik Temiz Oda Pass Kutusu
A non-ventilated stainless transfer cabinet that separates two rooms through sealed, interlocked doors.
- Non-Ventilated Transfer Chamber
- Dual-Door Interlock
- Smooth Lipless Interior
- Compression Door Seals
Ürün tanıtımı
The static pass box creates an enclosed material route through a cleanroom partition without its own fan or filter. Its double-wall stainless body conceals the interlock outside the payload space, and the flush internal chamber can be wiped without ledges. This simple configuration is suited to short transfers between compatible clean areas.
Ana Özellikler
A lipless sill supports smooth, obstruction-free transfer.
Compression latches draw the door against a continuous perimeter gasket.
A glazed panel permits visual confirmation before access.
Mechanical or electrical one-door-at-a-time operation can be selected.
Müşteri Ürün Sorunları
A passive pass box must preserve the wall opening and prevent direct room-to-room exposure.
A direct hatch lets air and particles pass between rooms.Two sealed doors create an intermediate transfer volume.
Exposed hardware collects dirt and is damaged by loads.The interlock is isolated behind the double-wall chamber.
Raised sills snag cartons and retain debris.A flush lipless transfer surface removes the ledge.
Door gaskets seal unevenly around the perimeter.Compression latches apply repeatable closure force along the door edge.
Tipik uygulamalar
Pharmaceutical packaging transferMedical-device componentsElectronics cleanroomsLaboratory sample movement
Teknik parametreler
Typical construction ranges for a static wall-mounted pass box are listed below.
| Temel malzemeler | Double-wall SUS 304 cabinet with polyurethane-insulated service void, glazed doors and silicone seals |
|---|---|
| Panel kalınlığı | 50-80 mm double-wall cabinet construction |
| Effective Width (Etkili Genişlik) | 400-1000 mm clear transfer width |
| Maksimum uzunluk | Up to 1200 mm chamber depth |
| Çelik yüz yüze kalınlığı | 1.0-1.5 mm stainless-steel facing |
| Core Density (Çekirdek Yoğunluğu) | 35-40 kg/m³ polyurethane service-void insulation |
| Termal İletkenlik | 0.022-0.028 W/(m·K) for polyurethane double-wall infill |
| Yüzey bitirme | Brushed SUS 304 with smooth flush interior seams and optional electropolished chamber |
| Ortak tip | Sealed folded or welded body with mechanically or electrically interlocked compression doors |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Mechanical or electronic interlockSUS 304 or SUS 316L bodyOpaque or glazed doorsWall-thickness trim frame
Planning a Static Cleanroom Pass Box specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
