İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Hava filtreleri ve kimyasal filtrasyon
Mini-Plate Orta Verimlilik Filtre
A slim rigid filter that packs closely spaced, hot-melt-stabilized media pleats into a compact frame for efficient fine-particle control.
- Compact Mini-Pleat Pack
- Hot-Melt Pleat Spacing
- Low Resistance
- Rigid Edge Sealing
Ürün tanıtımı
The mini-pleat medium-efficiency filter folds fine microglass or synthetic media into closely spaced pleats separated by continuous hot-melt beads. This separator-free geometry creates substantially more active area than a conventional pleated panel without adding frame depth. The pack is bonded around its perimeter into a galvanized, plastic or extruded-aluminum frame, so air is directed through the media rather than around its edges. The compact profile suits staged cleanroom air systems where installation depth is restricted but ePM1 particle capture is required ahead of the final HEPA stage.
Ana Özellikler
Continuous hot-melt beads preserve open airflow channels without corrugated metal separators.
Polyurethane perimeter sealant fixes the pack to the frame and blocks internal bypass.
A rigid upstream face and recessed media protect delicate pleat tips during routine handling.
Müşteri Ürün Sorunları
Mini-pleat filters must fit restricted spaces while keeping every narrow airflow channel open and securely sealed.
A deep conventional filter cannot fit inside a shallow retrofit section.Dense mini-pleat packing delivers the required media area in a 90-150 mm compact depth.
Irregular pleat gaps create localized high velocity and early dust loading.Calibrated hot-melt beads hold repeatable channels from the upstream to downstream edge.
Unprotected pleat tips are damaged while the filter is slid into a tight track.Recessed media and an optional faceguard shield the pack from rack edges and handling contact.
Fine particles bypass where the pack meets the enclosing frame.A continuous polyurethane bond seals all four sides of the mini-pleat pack.
Tipik uygulamalar
Cleanroom make-up-air unitsIntermediate filtration before HEPA filtersHospital and laboratory ventilationPharmaceutical support-area HVACCompact air-handler filter banks
Teknik parametreler
Typical construction ranges for a compact mini-pleat medium-efficiency air filter are shown below.
| Temel malzemeler | Water-resistant microglass or fine synthetic media with thermoplastic hot-melt separators |
|---|---|
| Panel kalınlığı | 90, 100 or 150 mm compact frame depth |
| Effective Width (Etkili Genişlik) | 287-610 mm modular face width |
| Maksimum uzunluk | Up to 610 mm modular face length |
| Çelik yüz yüze kalınlığı | 0.40-0.60 mm optional galvanized-steel expanded-metal faceguard |
| Core Density (Çekirdek Yoğunluğu) | Approximately 70-120 kg/m³ nominal assembled mini-pleat pack density |
| Termal İletkenlik | Approximately 0.033-0.042 W/(m·K) for the dry fiber medium |
| Yüzey bitirme | White filter media in a galvanized, molded-plastic or anodized-aluminum frame |
| Ortak tip | Hot-melt-spaced mini-pleat pack continuously sealed into a rigid perimeter frame |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
ISO ePM1 50-80% efficiency range90 mm, 100 mm or 150 mm frame depthMicroglass or fully synthetic mediaHeader flange, box frame or perimeter gasket
Planning a Mini-Pleat Medium-Efficiency Filter specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
