İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Hava filtreleri ve kimyasal filtrasyon
Yüksek sıcaklıklı HEPA filtresi
A heat-resistant HEPA filter assembled with glass-microfibre media, high-temperature separators and metal or ceramic framing for hot-air process zones.
- Heat-Resistant Construction
- Glass-Microfibre Media
- Ceramic or Stainless Frame
- High-Temperature Gasket
Ürün tanıtımı
The high-temperature HEPA filter is designed for ovens, dryers and depyrogenation equipment that operate beyond the temperature limits of standard polyurethane-sealed filters. A glass-microfibre pack is formed with aluminium or glass-based separators and secured inside a stainless-steel or composite-ceramic frame using an inorganic or high-temperature silicone sealant. Braided-glass or silicone gaskets accommodate the selected service temperature. Thermal expansion clearances and reinforced faceguards protect the pack during controlled heat-up and cool-down cycles.
Ana Özellikler
Stainless-steel or composite-ceramic framing remains dimensionally stable through repeated thermal cycles.
Braided-glass and high-temperature silicone gasket choices suit different oven flange arrangements.
Expansion-tolerant pack mounting reduces mechanical stress as the frame and media heat at different rates.
Müşteri Ürün Sorunları
Standard HEPA components can soften, outgas or lose their perimeter seal when exposed to prolonged high-temperature airflow.
Polyurethane sealant deteriorates during repeated oven cycles.An inorganic or temperature-rated silicone pack seal is selected for the intended continuous and peak temperature.
Different expansion rates distort the media pack as the filter heats.Controlled pack clearance and compliant high-temperature sealing absorb differential thermal movement.
A conventional rubber gasket hardens and leaks at elevated temperature.Braided-glass or high-temperature silicone gasketing maintains a suitable flange interface.
Rapid heating damages a filter even though its nominal temperature rating is adequate.The robust frame and reinforced pack are intended for defined ramp-up and cool-down procedures.
Tipik uygulamalar
Pharmaceutical depyrogenation tunnelsSterilizing and drying ovensFood-process hot-air systemsHigh-temperature coating linesLaboratory thermal chambers
Teknik parametreler
Representative construction ranges for high-temperature HEPA filters are listed below.
| Temel malzemeler | Heat-resistant glass-microfibre HEPA media with aluminium or glass-based separators |
|---|---|
| Panel kalınlığı | 84–292 mm overall filter depth |
| Effective Width (Etkili Genişlik) | 305–610 mm nominal face width |
| Maksimum uzunluk | 610 mm nominal yüz yüksekliğine kadar |
| Çelik yüz yüze kalınlığı | 0.8–1.2 mm 304 stainless-steel frame or protective faceguard |
| Core Density (Çekirdek Yoğunluğu) | Approximately 45–70 kg/m³ equivalent heat-resistant media-pack density |
| Termal İletkenlik | Approximately 0.040–0.055 W/(m·K) for the mineral-fibre filter pack |
| Yüzey bitirme | Clean brushed stainless steel or smooth composite-ceramic frame |
| Ortak tip | Braided-glass rope gasket or high-temperature silicone perimeter gasket |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Stainless-steel or composite-ceramic frameBraided-glass or silicone gasketSeparator-style or mini-pleat packContinuous-temperature configurations from 230 °C to 350 °C
Planning a High-Temperature HEPA Filter specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
