Complete polyurethane cleanroom sandwich panel with closed-cell foam core

Temiz Oda Duvar ve Tavan Sistemleri

Polyuretan Temiz Oda Sandwich Panel

A lightweight insulated panel with a rigid closed-cell polyurethane core bonded between coated steel facings, providing low heat transfer, good airtightness and fast modular installation for temperature-controlled cleanroom enclosures.

Closed-Cell PU Core
Low Thermal Conductivity
Lightweight Rigid Panel
Tight Interlocking Joint

Alıntı isteği Browse ürünleri

Ürün tanıtımı

Polyurethane Cleanroom Sandwich Panels are continuously laminated with a rigid PU foam core between two profiled steel skins. The closed-cell material limits air movement inside the core and delivers strong thermal insulation at relatively low panel thickness. Bonded facings create a stiff, lightweight module that is easy to carry and quick to assemble. Precisely formed tongue-and-groove joints reduce thermal leakage at panel edges and accept a continuous hygienic seal. The panel is suited to controlled areas where temperature separation and installation speed are more important than a mineral core.

Ana Özellikler

Closed-cell PU foam provides efficient insulation with a compact wall thickness.

Low core density reduces the load on framing and simplifies manual positioning.

Continuous bonding turns the two steel skins and foam center into a rigid composite.

Interlocking edges limit air paths and reduce thermal bridging at panel joints.

Smooth metal surfaces tolerate routine wiping without exposing the insulation.

Müşteri Ürün Sorunları

Customers mainly evaluate condensation control, joint tightness, surface durability and foam protection around cut-outs.

Poorly sealed joints allow warm humid air to reach a cold panel edge.Interlocking profiles and continuous sealant close the main air-leakage path between modules.

Exposed foam at service openings can absorb damage and create an untidy edge.Factory-finished openings use closed metal or polymer profiles around the entire cut-out.

Thin metal skins can dent during transport despite the rigid foam center.Protective film, corner guards and upright stacking preserve the smooth visible surfaces.

Thermal discontinuities around framing reduce the benefit of the insulated core.Compatible edge geometry and insulated junction details maintain continuity across the enclosure.

Tipik uygulamalar

Temperature-controlled pharmaceutical roomsChilled food packaging and hygiene roomsElectronics assembly environmentsClean cold-room interfacesGeneral insulated cleanroom ceilings

Teknik parametreler

Typical manufacturing ranges for closed-cell polyurethane cleanroom panels are shown below.

Temel malzemeler	Rigid closed-cell polyurethane foam
Panel kalınlığı	50, 75, 100, 120 or 150 mm
Effective Width (Etkili Genişlik)	950 or 1150 mm
Maksimum uzunluk	12000 mm
Çelik yüz yüze kalınlığı	0.40–0.60 mm
Core Density (Çekirdek Yoğunluğu)	40–45 kg/m³
Termal İletkenlik	0.022–0.024 W/(m·K)
Yüzey bitirme	PE-, HDP-, PVDF- or food-safe coated galvanized steel
Ortak tip	Concealed tongue-and-groove joint with continuous seal
Customization (Özelleşme)	Kullanılan amaçlanan uygulama ve çalışma ortamına göre kullanılabilir

Mevcut Seçenekler

Food-safe or PVDF coatingCold-room cam-lock edgeStainless steel inner faceCustom thickness and panel length

Planning a Polyurethane Cleanroom Sandwich Panel specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun