Three-quarter view of a wire-backed pleated HVAC pre-filter

Hava filtreleri ve kimyasal filtrasyon

Önceki Ön Filtre

A wire-supported pleated panel that increases coarse-media area and dust capacity without increasing the face size of the filter track.

Expanded Media Area
Wire-Stabilized Pleats
Moisture-Resistant Frame
Standard Filter-Track Sizes

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The pleated pre-filter forms cotton-synthetic or fully synthetic media into evenly spaced radial pleats over a corrosion-resistant downstream wire grid. The pleat geometry adds media area and dust storage within a familiar panel footprint. Adhesive bonds between the media, support grid and enclosing frame stop pleats from collapsing or fluttering at high airflow. Standard 25, 50 and 100 mm nominal depths allow the filter to replace flat throwaway panels while providing a longer service interval.

Ana Özellikler

Radial pleats place more active media in the same frontal area than a flat pad.

A corrosion-resistant expanded-wire backing prevents pleat collapse and media oscillation.

Diagonal frame members protect pleat geometry during transport and filter changes.

Multiple nominal depths balance available track space, resistance and dust-holding capacity.

Müşteri Ürün Sorunları

Pleated prefilters perform best when pleat spacing remains open and the panel seals evenly against the filter rack.

Flat pads require replacement before their full face area has stored much dust.The pleated pack multiplies usable media area and distributes deposited particles across deeper folds.

Closely packed pleats touch each other and create high-resistance dead zones.Controlled radial spacing keeps adjacent pleat walls separated throughout the panel.

Fan starts pull unsupported media downstream and permanently distort the pack.A bonded expanded-wire grid stabilizes the media on the air-exit side.

Humid intake air softens ordinary frames and opens bypass gaps at the corners.A high wet-strength frame with bonded mitered corners retains shape in normal HVAC humidity.

Tipik uygulamalar

Air-handler prefilter banksRooftop and packaged HVAC unitsFan-coil return-air cabinetsProtection for medium-efficiency bag filtersCommercial and light-process ventilation

Teknik parametreler

Typical construction ranges for a standard-capacity pleated HVAC pre-filter are shown below.

Temel malzemeler	Cotton-synthetic blend or 100% synthetic mechanical filter media on expanded-wire backing
Panel kalınlığı	22, 45 or 95 mm actual depth for nominal 25, 50 or 100 mm filters
Effective Width (Etkili Genişlik)	289-610 mm standard face width
Maksimum uzunluk	Up to 610 mm standard face length
Çelik yüz yüze kalınlığı	0.30-0.45 mm corrosion-resistant expanded-wire media support
Core Density (Çekirdek Yoğunluğu)	Approximately 30-60 kg/m³ nominal pleated-media bulk density
Termal İletkenlik	Approximately 0.035-0.045 W/(m·K) for dry cotton-synthetic media
Yüzey bitirme	White synthetic media with galvanized or corrosion-resistant support grid
Ortak tip	Pleated media and wire grid bonded into a moisture-resistant diagonal-support panel frame
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

ISO Coarse and MERV 8 grades22 mm, 45 mm or 95 mm actual frame depthMoisture-resistant board, ABS or galvanized-steel frameStandard- or high-capacity radial pleat count

Planning a Pleated Pre-Filter specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun