İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Duvar ve Tavan Sistemleri
Kağıt Honeycomb Temiz Oda Sandwich Panel
A lightweight steel-faced cleanroom panel with an expanded paper honeycomb core, designed for dry interior walls and ceilings where easy handling, good flatness and economical modular construction are primary requirements.
- Lightweight Honeycomb Core
- Flat Bonded Facings
- Easy Manual Handling
- Dry-Area Interior Use
Ürün tanıtımı
Paper Honeycomb Cleanroom Panels bond coated-steel facings to an expanded cellular paper core inside a closed perimeter frame. The honeycomb geometry supports both skins at many closely spaced points, producing a flat panel with low overall weight. Installers can move larger modules with less lifting effort, which is useful in interior fit-outs and ceiling work. The core must remain dry and fully enclosed, so this economical construction is intended for controlled indoor areas without wash-down exposure or high concentrated loads.
Ana Özellikler
Closely spaced honeycomb walls support smooth facings and limit surface waviness.
Low panel weight simplifies carrying, positioning and overhead installation.
Closed perimeter framing keeps paper edges isolated from the room environment.
The simple bonded structure offers an economical solution for non-load-bearing enclosures.
Müşteri Ürün Sorunları
Customers need clear limits for moisture exposure, fixture loads, core protection and long-term edge sealing.
Paper cores lose strength when moisture enters through an unsealed edge.Closed frames, intact facings and continuous joint sealant keep the cellular core dry.
Heavy accessories can crush a lightweight honeycomb where no insert is present.Fixtures are attached only at reinforced blocks or independent structural supports.
Repeated site cutting can expose paper cells and create debris.Openings are prepared in the factory and finished with sealed perimeter profiles.
A low-cost panel may be selected for a wash-down area beyond its service range.Paper honeycomb is reserved for dry interiors, while moisture-resistant cores are used elsewhere.
Tipik uygulamalar
Dry electronics assembly roomsGeneral cleanroom partitionsLight-duty suspended ceilingsPackaging and inspection roomsTemporary or reconfigurable controlled areas
Teknik parametreler
Typical specifications for dry-area paper honeycomb cleanroom panels are shown below.
| Temel malzemeler | Expanded kraft-paper honeycomb with closed perimeter frame |
|---|---|
| Panel kalınlığı | 50, 75 or 100 mm |
| Effective Width (Etkili Genişlik) | 980 or 1180 mm |
| Maksimum uzunluk | 6000 mm |
| Çelik yüz yüze kalınlığı | 0.40–0.60 mm |
| Core Density (Çekirdek Yoğunluğu) | 32–48 kg/m³ |
| Termal İletkenlik | 0.045–0.060 W/(m·K) |
| Yüzey bitirme | Smooth PE-coated galvanized steel for dry interior cleaning |
| Ortak tip | Framed tongue-and-groove or center-aluminum connection |
| Customization (Özelleşme) | Kullanılan amaçlanan uygulama ve çalışma ortamına göre kullanılabilir |
Mevcut Seçenekler
Local fixture insertsCeiling-specific frameAlternative light-color coatingFactory-sealed cut-outs
Planning a Paper Honeycomb Cleanroom Sandwich Panel specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
