Cleanroom air handling unit with white hygienic insulated casing

ОВК и оборудование для обработки воздуха в чистых помещениях

Установка очистки воздуха в чистых помещениях

A low-leakage hygienic air handler designed to filter, cool, heat and condition supply air for pressure-controlled clean production spaces.

Smooth Hygienic Interior
Multi-Stage Filtration
Controlled Supply Air
Condensation-Resistant Casing

Запрос котировки Просмотреть продукты

Введение продукции

A cleanroom air handling unit conditions the large, stable airflow needed to control temperature, humidity, pressure cascade and particle transport. The casing uses flush cleanable inner panels, sealed access doors, drainable coil sections and corrosion-resistant hardware. Prefilters protect the coil and downstream final filters, while direct-drive fans modulate against filter loading and room-pressure demand. Coil face velocity, condensate drainage and access clearances are selected to prevent water carryover into downstream sections.

Основные характеристики

Flush internal surfaces reduce exposed ledges around filters, coils and service doors.

Separated prefilter and fine-filter stages protect coils and extend the useful life of downstream final filters.

Sloped stainless-steel drain pans remove condensate from cooling-coil sections without standing water.

Variable-speed direct-drive fans maintain scheduled airflow as filters load and operating modes change.

Обеспокоенность клиентов продуктами

Particle control depends on the entire supply-air path remaining clean, dry and pressure-stable through changing filter and thermal loads.

Dust accumulates on internal ledges that are difficult to reach during sanitation.Flush inner panels and removable components leave broad surfaces accessible for wipe-down.

Cooling-coil condensate remains in the unit and supports odor or microbial growth.A sloped stainless drain pan and correctly trapped drain evacuate water from the wet section.

Rising filter resistance reduces room air changes and destabilizes pressure.Fan-speed control responds to airflow or static-pressure feedback across the operating filter range.

Air bypasses the final filter because the holding frame is not uniformly sealed.Gasketed filter tracks apply even compression around each selected filter module.

Типичные приложения

Sterile pharmaceutical manufacturingBiological laboratoriesMedical-device clean assemblySemiconductor support cleanroomsHospital clean treatment areas

Технические параметры

The following ranges describe a typical hygienic double-skin AHU for cleanroom service.

Основной материал	Closed-cell polyurethane or non-shedding mineral-wool casing insulation
Толщина панели	50–60 mm double-skin hygienic panel
эффективная ширина	900–3600 mm nominal unit width
Максимальная длина	Up to 11000 mm with gasketed modular sections
Толщина линий стали	0.6–1.0 mm outer skin and 0.8–1.0 mm cleanable inner skin
Плотность ядра	40–44 kg/m³ polyurethane or 82–100 kg/m³ mineral wool
Теплопроводимость	0.022–0.038 W/(m·K) for the insulated casing core
Поверхностная отделка	Powder-coated exterior with smooth galvanized, coated or 304 stainless-steel interior
Объединенный тип	Flush gasketed panels on thermal-break frame with sealed filter and access-door interfaces
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

304 or 316L stainless-steel wet-section liningEC fan wall with airflow measurementHeating, cooling and reheat coil combinationsPrefilter, fine-filter and HEPA housing stages

Planning a Cleanroom Air Handling Unit specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой