English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Оборудование для ламинарного потока и ограничения
Модульная камера для отбора проб
A panel-built sampling suite that separates incoming containers, personnel access and controlled sampling work within a self-contained warehouse installation.
- Panel-Built Sampling Suite
- Separated Material Access
- Integrated Airflow Zones
- Expandable Modular Layout
Введение продукции
The modular sampling room encloses a complete workflow rather than a single open booth. Insulated cleanroom panels form the sampling space, while personnel and material doors can be arranged to avoid crossing routes. A filtered supply and return system maintains the selected room pressure and can include a local downflow station over the active sampling table. The panel system allows future extension or relocation without masonry construction.
Основные характеристики
A local downflow zone can be integrated within the larger clean room.
Flush wall and ceiling joints create cleanable internal surfaces.
Service panels group electrical, airflow and monitoring connections outside the work area.
Modular wall bays permit controlled expansion as sampling capacity grows.
Обеспокоенность клиентов продуктами
A full sampling workflow needs orderly movement of people and containers, not just localized dust capture at one table.
Personnel and raw-material routes cross at one doorway.Dedicated doors separate gowning access from container entry.
Only the active sampling point requires strong local capture.A downflow work zone is integrated inside the larger controlled room.
Warehouse construction changes interrupt operations.Prefabricated panels install with limited wet building work.
Future capacity requires another sampling bay.Modular wall and ceiling sections can extend the suite layout.
Типичные приложения
Incoming pharmaceutical materialsFood-ingredient samplingCosmetic raw-material checksControlled warehouse quality sampling
Технические параметры
Typical configurable construction ranges for a modular raw-material sampling room are listed below.
| Основной материал | Mineral-wool or polyurethane cleanroom panels with powder-coated steel faces and SUS304 internal work-zone liners |
|---|---|
| Толщина панели | 50-100 mm wall and ceiling panels |
| эффективная ширина | 2500-6000 mm clear room width |
| Максимальная длина | Up to 12000 mm modular room length |
| Толщина линий стали | 0.6-1.0 mm coated panel faces; 1.0-1.2 mm SUS304 local liners |
| Плотность ядра | 80-120 kg/m³ mineral wool or 38-45 kg/m³ polyurethane |
| Теплопроводимость | 0.035-0.045 W/(m·K) mineral wool or 0.022-0.028 W/(m·K) polyurethane |
| Поверхностная отделка | Low-sheen white cleanroom coating with brushed stainless work-zone surfaces |
| Объединенный тип | Flush sealed tongue-and-groove panels with coved internal bases and gasketed access doors |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Personnel and material airlocksIntegrated downflow boothPass-through sample hatchPressure display and room controls
Planning a Modular Sampling Room specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
