Complete wide cargo cleanroom air shower for carts and palletised materials

Персонал и оборудование для дезактивации материалов

Cargo Cleanroom воздушный душ

A reinforced material-transfer air shower that removes loose surface dust from carts, palletised loads and production equipment before clean-area entry.

Wide Cargo Passage
Side and Top Cleaning
Flush Wheeled Route
Heavy-Duty Returns

Запрос котировки Просмотреть продукты

Введение продукции

The cargo air shower is sized around material handling rather than a stationary operator. Sidewall jets, and optional roof jets, direct filtered air across trolley frames, cartons and equipment surfaces. A level reinforced floor supports wheeled transfer, while guarded low-level returns and larger prefilters accommodate the heavier fibres and warehouse dust commonly carried by incoming materials.

Основные характеристики

A broad, flush passage accommodates carts and pallet jacks without projecting floor rails.

Side and roof nozzle zones can clean vertical faces and upper load surfaces.

Lower impact protection guards returns from routine trolley contact.

Large-area prefilters are suited to coarse packaging fibres.

Large interlocked doors preserve the transfer boundary during the cleaning cycle.

Обеспокоенность клиентов продуктами

Material loads vary in height, shape and wheel loading, so the chamber must clean exposed surfaces without obstructing the transfer route.

Tall loads leave their upper surfaces outside sidewall airflow.Optional roof nozzles direct filtered air downward across load tops.

Raised thresholds impede pallet-jack movement.A flush reinforced floor maintains a smooth wheeled path.

Cart impacts damage exposed return grilles.Kick plates and protected inlet faces shield the low-level return sections.

Packaging debris clogs small personnel-air-shower filters.Expanded washable prefilter banks offer greater coarse-dust collection area.

Типичные приложения

Pharmaceutical material transferFood ingredient cart entryElectronics equipment move-inPackaging component decontamination

Технические параметры

Typical structural ranges for a cart and equipment cargo air shower are given below.

Основной материал	Reinforced mineral-wool insulated steel enclosure with multi-side nozzle plenums, washable prefilters and H13 HEPA banks
Толщина панели	50-75 mm impact-reinforced wall and roof panels
эффективная ширина	1500-2500 mm clear cargo passage width
Максимальная длина	Up to 6000 mm modular cargo cleaning length
Толщина линий стали	1.2-1.5 mm steel facing with heavier stainless kick plates
Плотность ядра	80-120 kg/m³ mineral-wool enclosure core
Теплопроводимость	0.036-0.045 W/(m·K) for the mineral-wool panel construction
Поверхностная отделка	Powder-coated upper panels with brushed stainless lower impact protection
Объединенный тип	Bolted heavy-duty modular frame with flush floor joints and electrically interlocked cargo doors
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Swing, sliding or roll-up cargo doorsSide-plus-ceiling nozzle arrangementWheel guides and bumper railsPallet-jack or powered-cart clearances

Planning a Cargo Cleanroom Air Shower specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой