English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Воздушные фильтры и химическая фильтрация
Фильтры средней эффективности V-Bank
A multi-pack V-cell filter that expands media area and airflow capacity inside a durable full-size HVAC frame.
- Multi-Pack V Geometry
- High Media Area
- Aerodynamic ABS Frame
- Bidirectional Airflow Option
Введение продукции
The V-bank medium-efficiency filter arranges several hot-melt-spaced mini-pleat packs in a V formation inside a molded ABS or galvanized enclosing frame. Each V opens a broad inlet path and exposes two media faces, greatly increasing surface area without extending the cabinet depth. Molded tracks position the packs precisely, rigid end caps brace the assembly and polyurethane sealant closes every pack-to-frame interface. The result is a robust ePM1 filter suited to high-volume air handlers where conventional panels would require excessive bank area.
Основные характеристики
Aerodynamic V inlets distribute air across both sides of every media pack.
Rigid molded tracks and end caps resist racking during transport and high-velocity operation.
Recessed pack edges allow a coarse prefilter to be mounted without contacting the media.
Обеспокоенность клиентов продуктами
A V-bank filter must deliver high face airflow without starving inner packs or opening leaks between the V cells.
A flat filter bank requires too much plant-room area for the design airflow.The V geometry multiplies media area behind each standard 592 mm face.
Air favors the outer packs and leaves the central media underused.Streamlined inlet channels and equal V spacing divide the face flow across all packs.
Flexible filter elements distort under high static pressure.ABS sidewalls, molded pack tracks and mechanically fastened end caps form a rigid load path.
A prefilter mounted directly upstream rubs against the fine media.Recessed pack faces and integral attachment points preserve clearance for the prefilter.
Типичные приложения
High-volume cleanroom air handlersPharmaceutical HVAC filtrationHealthcare ventilation systemsData-center cooling airFinal filtration in commercial air-handling units
Технические параметры
Typical construction ranges for a multi-pack V-bank medium-efficiency filter are listed below.
| Основной материал | Microfine glass-fiber mini-pleat packs with thermoplastic bead separators |
|---|---|
| Толщина панели | 292 mm nominal V-bank depth |
| эффективная ширина | 287, 490 or 592 mm modular face width |
| Максимальная длина | Up to 592 mm modular face height |
| Толщина линий стали | 0.50-0.80 mm optional galvanized-steel prefilter support grille |
| Плотность ядра | Approximately 80-140 kg/m³ nominal assembled V-pack density |
| Теплопроводимость | Approximately 0.033-0.041 W/(m·K) for the dry microglass medium |
| Поверхностная отделка | White microglass packs in black or natural-gray molded ABS framing |
| Объединенный тип | Mini-pleat packs mechanically located in V tracks and fully bonded with polyurethane sealant |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
ISO ePM1 60%, 70% or 80%Four-pack or six-pack V arrangementSingle-header or box-style perimeterIntegrated coarse-prefilter clips
Planning a V-Bank Medium-Efficiency Filter specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
