Three-quarter view of stainless-steel high-temperature HEPA filter for hot-air processing

Воздушные фильтры и химическая фильтрация

Высокотемпературный HEPA-фильтр

A heat-resistant HEPA filter assembled with glass-microfibre media, high-temperature separators and metal or ceramic framing for hot-air process zones.

Heat-Resistant Construction
Glass-Microfibre Media
Ceramic or Stainless Frame
High-Temperature Gasket

Запрос котировки Просмотреть продукты

Введение продукции

The high-temperature HEPA filter is designed for ovens, dryers and depyrogenation equipment that operate beyond the temperature limits of standard polyurethane-sealed filters. A glass-microfibre pack is formed with aluminium or glass-based separators and secured inside a stainless-steel or composite-ceramic frame using an inorganic or high-temperature silicone sealant. Braided-glass or silicone gaskets accommodate the selected service temperature. Thermal expansion clearances and reinforced faceguards protect the pack during controlled heat-up and cool-down cycles.

Основные характеристики

Mineral media, metal separators and temperature-rated sealants replace thermoplastic components in the hot airstream.

Stainless-steel or composite-ceramic framing remains dimensionally stable through repeated thermal cycles.

Braided-glass and high-temperature silicone gasket choices suit different oven flange arrangements.

Expansion-tolerant pack mounting reduces mechanical stress as the frame and media heat at different rates.

Обеспокоенность клиентов продуктами

Standard HEPA components can soften, outgas or lose their perimeter seal when exposed to prolonged high-temperature airflow.

Polyurethane sealant deteriorates during repeated oven cycles.An inorganic or temperature-rated silicone pack seal is selected for the intended continuous and peak temperature.

Different expansion rates distort the media pack as the filter heats.Controlled pack clearance and compliant high-temperature sealing absorb differential thermal movement.

A conventional rubber gasket hardens and leaks at elevated temperature.Braided-glass or high-temperature silicone gasketing maintains a suitable flange interface.

Rapid heating damages a filter even though its nominal temperature rating is adequate.The robust frame and reinforced pack are intended for defined ramp-up and cool-down procedures.

Типичные приложения

Pharmaceutical depyrogenation tunnelsSterilizing and drying ovensFood-process hot-air systemsHigh-temperature coating linesLaboratory thermal chambers

Технические параметры

Representative construction ranges for high-temperature HEPA filters are listed below.

Основной материал	Heat-resistant glass-microfibre HEPA media with aluminium or glass-based separators
Толщина панели	84–292 mm overall filter depth
эффективная ширина	305–610 mm nominal face width
Максимальная длина	Up to 610 mm nominal face height
Толщина линий стали	0.8–1.2 mm 304 stainless-steel frame or protective faceguard
Плотность ядра	Approximately 45–70 kg/m³ equivalent heat-resistant media-pack density
Теплопроводимость	Approximately 0.040–0.055 W/(m·K) for the mineral-fibre filter pack
Поверхностная отделка	Clean brushed stainless steel or smooth composite-ceramic frame
Объединенный тип	Braided-glass rope gasket or high-temperature silicone perimeter gasket
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Stainless-steel or composite-ceramic frameBraided-glass or silicone gasketSeparator-style or mini-pleat packContinuous-temperature configurations from 230 °C to 350 °C

Planning a High-Temperature HEPA Filter specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой