Three-quarter view of a static stainless-steel cleanroom pass box

Персонал и оборудование для дезактивации материалов

Статическая коробка пропуска для чистых помещений

A non-ventilated stainless transfer cabinet that separates two rooms through sealed, interlocked doors.

Non-Ventilated Transfer Chamber
Dual-Door Interlock
Smooth Lipless Interior
Compression Door Seals

Введение продукции

The static pass box creates an enclosed material route through a cleanroom partition without its own fan or filter. Its double-wall stainless body conceals the interlock outside the payload space, and the flush internal chamber can be wiped without ledges. This simple configuration is suited to short transfers between compatible clean areas.

Основные характеристики

The concealed interlock is protected from impact by trays and cartons.

A lipless sill supports smooth, obstruction-free transfer.

Compression latches draw the door against a continuous perimeter gasket.

A glazed panel permits visual confirmation before access.

Mechanical or electrical one-door-at-a-time operation can be selected.

Обеспокоенность клиентов продуктами

A passive pass box must preserve the wall opening and prevent direct room-to-room exposure.

A direct hatch lets air and particles pass between rooms.Two sealed doors create an intermediate transfer volume.

Exposed hardware collects dirt and is damaged by loads.The interlock is isolated behind the double-wall chamber.

Raised sills snag cartons and retain debris.A flush lipless transfer surface removes the ledge.

Door gaskets seal unevenly around the perimeter.Compression latches apply repeatable closure force along the door edge.

Типичные приложения

Pharmaceutical packaging transferMedical-device componentsElectronics cleanroomsLaboratory sample movement

Технические параметры

Typical construction ranges for a static wall-mounted pass box are listed below.

Основной материал	Double-wall SUS 304 cabinet with polyurethane-insulated service void, glazed doors and silicone seals
Толщина панели	50-80 mm double-wall cabinet construction
эффективная ширина	400-1000 mm clear transfer width
Максимальная длина	Up to 1200 mm chamber depth
Толщина линий стали	1.0-1.5 mm stainless-steel facing
Плотность ядра	35-40 kg/m³ polyurethane service-void insulation
Теплопроводимость	0.022-0.028 W/(m·K) for polyurethane double-wall infill
Поверхностная отделка	Brushed SUS 304 with smooth flush interior seams and optional electropolished chamber
Объединенный тип	Sealed folded or welded body with mechanically or electrically interlocked compression doors
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Mechanical or electronic interlockSUS 304 or SUS 316L bodyOpaque or glazed doorsWall-thickness trim frame

Planning a Static Cleanroom Pass Box specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой