Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Portas de sala limpa, janelas e sistemas de bloqueio
Janela de vidro de segurança temperada Cleanroom
A fixed observation window centered on heat-treated tempered safety glass, providing clear process visibility and improved resistance to accidental human impact.
- Heat-Treated Safety Glass
- Clear High-Visibility Pane
- Finished Glass Edges
- Sealed Hygienic Mounting
Introdução do produto
This window specifies tempered safety glass as the primary performance feature. The pane is cut, edge-worked and drilled before heat treatment, then installed in a cleanroom frame with continuous resilient support. Tempered glass offers substantially greater strength than ordinary annealed glass of the same thickness and breaks into small fragments rather than large sharp shards. It is suited to doorside observation zones, personnel routes and larger internal panes where accidental impact is a design concern.
Características-chave
Safety-fracture behavior reduces the risk associated with large sharp glass pieces after breakage.
Clear low-distortion glazing maintains direct operator sightlines through controlled-area partitions.
Continuous gasket or silicone support avoids hard point loading at the pane edge.
Preocupações do produto do cliente
Safety glazing must be specified at the correct thickness and supported uniformly because all cutting and edge work must be completed before tempering.
Ordinary glass is vulnerable to accidental contact from carts or personnel.Tempered safety glass provides greater impact strength than annealed glass of the same thickness.
Edge damage during installation can initiate later glass failure.Finished edges, setting blocks and continuous resilient glazing keep the pane away from hard metal contact.
Late field drilling or trimming is requested after the opening changes.The pane is manufactured to final dimensions before tempering, with the frame adjusted rather than cutting the finished glass.
Aplicações típicas
Cleanroom personnel corridorsDoor-adjacent observation panelsLaboratory viewing partitionsMedical-device production rooms
Parâmetros técnicos
Common tempered-glass and cleanroom-frame ranges are listed below; final pane thickness depends on size and support conditions.
| Material principal | Clear heat-treated tempered soda-lime safety glass |
|---|---|
| Painel de espessura | 6, 8, 10 or 12 mm glass; thicker panes available for larger openings |
| Largura efetiva | 300–2000 mm clear viewing width |
| Comprimento máximo | 3000 mm typical cleanroom-window height |
| Aço enfrentando espessura | 1.0–1.5 mm for optional stainless frame; 0 mm for aluminum frame |
| Densidade Core | Approximately 2500 kg/m³ |
| Condutividade térmica | Approximately 1.0 W/(m·K) |
| Superfície acabado | Clear polished glass with ground or polished safety edges and optional ceramic-frit border |
| Tipo conjunto | Four-side supported fixed glazing with EPDM gasket or neutral-cure structural silicone |
| Customização | Disponível com base na aplicação pretendida e ambiente operacional |
Opções disponíveis
Low-iron tempered glassHeat-soaked tempered glassCeramic-frit privacy borderSingle or double-glazed assembly
Planning a Tempered Safety Glass Cleanroom Window specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
