Tempered safety glass cleanroom observation window

Temiz Oda Kapıları, Pencereler ve Kilitleme Sistemleri

Tempered Güvenlik Cam Temiz Oda

A fixed observation window centered on heat-treated tempered safety glass, providing clear process visibility and improved resistance to accidental human impact.

Heat-Treated Safety Glass
Clear High-Visibility Pane
Finished Glass Edges
Sealed Hygienic Mounting

Alıntı isteği Browse ürünleri

Ürün tanıtımı

This window specifies tempered safety glass as the primary performance feature. The pane is cut, edge-worked and drilled before heat treatment, then installed in a cleanroom frame with continuous resilient support. Tempered glass offers substantially greater strength than ordinary annealed glass of the same thickness and breaks into small fragments rather than large sharp shards. It is suited to doorside observation zones, personnel routes and larger internal panes where accidental impact is a design concern.

Ana Özellikler

Heat treatment places the glass surfaces in compression for greater resistance to impact and temperature differentials.

Safety-fracture behavior reduces the risk associated with large sharp glass pieces after breakage.

Clear low-distortion glazing maintains direct operator sightlines through controlled-area partitions.

Continuous gasket or silicone support avoids hard point loading at the pane edge.

Müşteri Ürün Sorunları

Safety glazing must be specified at the correct thickness and supported uniformly because all cutting and edge work must be completed before tempering.

Ordinary glass is vulnerable to accidental contact from carts or personnel.Tempered safety glass provides greater impact strength than annealed glass of the same thickness.

Edge damage during installation can initiate later glass failure.Finished edges, setting blocks and continuous resilient glazing keep the pane away from hard metal contact.

Late field drilling or trimming is requested after the opening changes.The pane is manufactured to final dimensions before tempering, with the frame adjusted rather than cutting the finished glass.

Tipik uygulamalar

Cleanroom personnel corridorsDoor-adjacent observation panelsLaboratory viewing partitionsMedical-device production rooms

Teknik parametreler

Common tempered-glass and cleanroom-frame ranges are listed below; final pane thickness depends on size and support conditions.

Temel malzemeler	Clear heat-treated tempered soda-lime safety glass
Panel kalınlığı	6, 8, 10 or 12 mm glass; thicker panes available for larger openings
Effective Width (Etkili Genişlik)	300–2000 mm clear viewing width
Maksimum uzunluk	3000 mm typical cleanroom-window height
Çelik yüz yüze kalınlığı	1.0–1.5 mm for optional stainless frame; 0 mm for aluminum frame
Core Density (Çekirdek Yoğunluğu)	Approximately 2500 kg/m³
Termal İletkenlik	Approximately 1.0 W/(m·K)
Yüzey bitirme	Clear polished glass with ground or polished safety edges and optional ceramic-frit border
Ortak tip	Four-side supported fixed glazing with EPDM gasket or neutral-cure structural silicone
Customization (Özelleşme)	Kullanılan amaçlanan uygulama ve çalışma ortamına göre kullanılabilir

Mevcut Seçenekler

Low-iron tempered glassHeat-soaked tempered glassCeramic-frit privacy borderSingle or double-glazed assembly

Planning a Tempered Safety Glass Cleanroom Window specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun