Tempered safety glass cleanroom observation window

Pintu Bilik Bersih, Windows dan Sistem Interlock

Tingkap Kaca Keselamatan Tempered Cleanroom

A fixed observation window centered on heat-treated tempered safety glass, providing clear process visibility and improved resistance to accidental human impact.

Heat-Treated Safety Glass
Clear High-Visibility Pane
Finished Glass Edges
Sealed Hygienic Mounting

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

This window specifies tempered safety glass as the primary performance feature. The pane is cut, edge-worked and drilled before heat treatment, then installed in a cleanroom frame with continuous resilient support. Tempered glass offers substantially greater strength than ordinary annealed glass of the same thickness and breaks into small fragments rather than large sharp shards. It is suited to doorside observation zones, personnel routes and larger internal panes where accidental impact is a design concern.

Ciri-ciri Utama

Heat treatment places the glass surfaces in compression for greater resistance to impact and temperature differentials.

Safety-fracture behavior reduces the risk associated with large sharp glass pieces after breakage.

Clear low-distortion glazing maintains direct operator sightlines through controlled-area partitions.

Continuous gasket or silicone support avoids hard point loading at the pane edge.

Kebimbangan Produk Pelanggan

Safety glazing must be specified at the correct thickness and supported uniformly because all cutting and edge work must be completed before tempering.

Ordinary glass is vulnerable to accidental contact from carts or personnel.Tempered safety glass provides greater impact strength than annealed glass of the same thickness.

Edge damage during installation can initiate later glass failure.Finished edges, setting blocks and continuous resilient glazing keep the pane away from hard metal contact.

Late field drilling or trimming is requested after the opening changes.The pane is manufactured to final dimensions before tempering, with the frame adjusted rather than cutting the finished glass.

Permohonan yang biasa

Cleanroom personnel corridorsDoor-adjacent observation panelsLaboratory viewing partitionsMedical-device production rooms

Parameter teknikal

Common tempered-glass and cleanroom-frame ranges are listed below; final pane thickness depends on size and support conditions.

Bahan Teras	Clear heat-treated tempered soda-lime safety glass
Ketebalan Panel	6, 8, 10 or 12 mm glass; thicker panes available for larger openings
Lebar berkesan	300–2000 mm clear viewing width
Panjang maksimum	3000 mm typical cleanroom-window height
Keluli Menghadapi Ketebalan	1.0–1.5 mm for optional stainless frame; 0 mm for aluminum frame
Ketumpatan teras	Approximately 2500 kg/m³
Kekonduksian Terma	Approximately 1.0 W/(m·K)
Kemasan permukaan	Clear polished glass with ground or polished safety edges and optional ceramic-frit border
Jenis Bersatu	Four-side supported fixed glazing with EPDM gasket or neutral-cure structural silicone
Penyesuaian	Terdapat berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi

Pilihan yang boleh didapati

Low-iron tempered glassHeat-soaked tempered glassCeramic-frit privacy borderSingle or double-glazed assembly

Planning a Tempered Safety Glass Cleanroom Window specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami