English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Двери в чистых помещениях, окна и системы блокировки
Затем защитное стекло для очищенного окна
A fixed observation window centered on heat-treated tempered safety glass, providing clear process visibility and improved resistance to accidental human impact.
- Heat-Treated Safety Glass
- Clear High-Visibility Pane
- Finished Glass Edges
- Sealed Hygienic Mounting
Введение продукции
This window specifies tempered safety glass as the primary performance feature. The pane is cut, edge-worked and drilled before heat treatment, then installed in a cleanroom frame with continuous resilient support. Tempered glass offers substantially greater strength than ordinary annealed glass of the same thickness and breaks into small fragments rather than large sharp shards. It is suited to doorside observation zones, personnel routes and larger internal panes where accidental impact is a design concern.
Основные характеристики
Safety-fracture behavior reduces the risk associated with large sharp glass pieces after breakage.
Clear low-distortion glazing maintains direct operator sightlines through controlled-area partitions.
Continuous gasket or silicone support avoids hard point loading at the pane edge.
Обеспокоенность клиентов продуктами
Safety glazing must be specified at the correct thickness and supported uniformly because all cutting and edge work must be completed before tempering.
Ordinary glass is vulnerable to accidental contact from carts or personnel.Tempered safety glass provides greater impact strength than annealed glass of the same thickness.
Edge damage during installation can initiate later glass failure.Finished edges, setting blocks and continuous resilient glazing keep the pane away from hard metal contact.
Late field drilling or trimming is requested after the opening changes.The pane is manufactured to final dimensions before tempering, with the frame adjusted rather than cutting the finished glass.
Типичные приложения
Cleanroom personnel corridorsDoor-adjacent observation panelsLaboratory viewing partitionsMedical-device production rooms
Технические параметры
Common tempered-glass and cleanroom-frame ranges are listed below; final pane thickness depends on size and support conditions.
| Основной материал | Clear heat-treated tempered soda-lime safety glass |
|---|---|
| Толщина панели | 6, 8, 10 or 12 mm glass; thicker panes available for larger openings |
| эффективная ширина | 300–2000 mm clear viewing width |
| Максимальная длина | 3000 mm typical cleanroom-window height |
| Толщина линий стали | 1.0–1.5 mm for optional stainless frame; 0 mm for aluminum frame |
| Плотность ядра | Approximately 2500 kg/m³ |
| Теплопроводимость | Approximately 1.0 W/(m·K) |
| Поверхностная отделка | Clear polished glass with ground or polished safety edges and optional ceramic-frit border |
| Объединенный тип | Four-side supported fixed glazing with EPDM gasket or neutral-cure structural silicone |
| Customization | Доступно в зависимости от предполагаемого приложения и операционной среды |
Доступные варианты
Low-iron tempered glassHeat-soaked tempered glassCeramic-frit privacy borderSingle or double-glazed assembly
Planning a Tempered Safety Glass Cleanroom Window specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
