Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Portes de salle blanche, fenêtres et systèmes de verrouillage
Fenêtre de salle blanche en verre de sécurité
A fixed observation window centered on heat-treated tempered safety glass, providing clear process visibility and improved resistance to accidental human impact.
- Heat-Treated Safety Glass
- Clear High-Visibility Pane
- Finished Glass Edges
- Sealed Hygienic Mounting
Introduction de produit
This window specifies tempered safety glass as the primary performance feature. The pane is cut, edge-worked and drilled before heat treatment, then installed in a cleanroom frame with continuous resilient support. Tempered glass offers substantially greater strength than ordinary annealed glass of the same thickness and breaks into small fragments rather than large sharp shards. It is suited to doorside observation zones, personnel routes and larger internal panes where accidental impact is a design concern.
Key Features
Safety-fracture behavior reduces the risk associated with large sharp glass pieces after breakage.
Clear low-distortion glazing maintains direct operator sightlines through controlled-area partitions.
Continuous gasket or silicone support avoids hard point loading at the pane edge.
Préoccupations du client produit
Safety glazing must be specified at the correct thickness and supported uniformly because all cutting and edge work must be completed before tempering.
Ordinary glass is vulnerable to accidental contact from carts or personnel.Tempered safety glass provides greater impact strength than annealed glass of the same thickness.
Edge damage during installation can initiate later glass failure.Finished edges, setting blocks and continuous resilient glazing keep the pane away from hard metal contact.
Late field drilling or trimming is requested after the opening changes.The pane is manufactured to final dimensions before tempering, with the frame adjusted rather than cutting the finished glass.
Les applications typiques
Cleanroom personnel corridorsDoor-adjacent observation panelsLaboratory viewing partitionsMedical-device production rooms
Paramètres techniques
Common tempered-glass and cleanroom-frame ranges are listed below; final pane thickness depends on size and support conditions.
| Matériaux de base | Clear heat-treated tempered soda-lime safety glass |
|---|---|
| Panneau épaisseur | 6, 8, 10 or 12 mm glass; thicker panes available for larger openings |
| Largeur effective | 300–2000 mm clear viewing width |
| Longueur maximale | 3000 mm typical cleanroom-window height |
| Acier face épaisseur | 1.0–1.5 mm for optional stainless frame; 0 mm for aluminum frame |
| Densité Core | Approximately 2500 kg/m³ |
| Conductivité thermique | Approximately 1.0 W/(m·K) |
| surface finie | Clear polished glass with ground or polished safety edges and optional ceramic-frit border |
| Type joint | Four-side supported fixed glazing with EPDM gasket or neutral-cure structural silicone |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation |
Options disponibles
Low-iron tempered glassHeat-soaked tempered glassCeramic-frit privacy borderSingle or double-glazed assembly
Planning a Tempered Safety Glass Cleanroom Window specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
